This goes against what many of us assume. But I think some might be jumping to conclusions a bit early.
If you look at the numbers by quarter you see a huge drop off in Q2 of 2011. Loyality went from 40% to 26%. And that would be the lowest for any quarter since 2008 when this study begins.
It's probably reasonable to assume that the Japanese earthquake and Tsunami had some affect on supply. When those Prius owners can't get a new one some have to buy something else.
And so by the end of Q4 you see loayalty back at 40%.
Interesting statistics in this article, Chuck. I guess the big question is whether the hybrid owners who chose not to continue with a hybrid went on to buy an EV. It could be that those devoted enough to get a hybrid would be even more interested in an EV now that there are more choices in the EV world.
Beth, another disturbing statistic is the market penetration rate. It is declining. It is also very small.
I looked at hybrids recently. One of the ones I saw had a break even period of at least 2 years. That seemed fairly good since I would keep a car for much longer than that. On the other hand, I think that was optomistic. So, considering the points made in the article, it seems that gasoline vehicles will catch up to hybrids in total cost of ownership (TCO) before long. In many technology businesses TCO is an important selling point. In the consumer field this is becoming important as well.
I have had my hybrid for just over a year, and when the time comes, I may not buy another. But it's not because I am not happy with it. The Chrysler Aspen Two Mode Hemi Hybrid was only produced for about 1/2 of the 2009 model year. When it comes time to replace it, I don't know if I will be able to find another hybrid rated to tow - the Aspen is rated to tow 6000 lbs. I looked at the Ford Escape and Toyota Highlander hybrids and their spec's were lacklustre when compared to the Aspen. When (if ?) the SUV and truck market opens up to the idea of hybrids, there might be another Chrysler Aspen. I think Dodge has a truck package that is similar to a hybrid, but I think the selling point was the truck with a generator package for remote construction sites.
Charles, you are right, those who have hybrid cars, won't prefer it again. The initial cost for hybrid cars are more when compare with stand alone fuel vehicles. I had a hybrid car and I feel that, when am switching out of gasoline, the engine power and pulling are comes down. I mean the engine is not outputting 100% of its performance. This is a disappointing factor for those who love crazy driving.
I think the fact that hybrid owners aren't ponying up when they're back in the car market for another hybrid vehicle has to speak volumes. Unless the data shows they're ponying up for another type of alternative vehicle like a pure EV, I don't know how you can interpret the findings any other way but to say the technology is losing ground. We all know it's much easier to sell something to someone who has already purchased it once or bought into the overall value proposition. I find these findings pretty disheartening.
As energy efficiency becomes more and more a concern for makers of electronics devices, researchers are coming up with new ways to harvest energy from sound vibration, footsteps, and even electromagnetic fields in the air.
The government wants to study your brain, and DARPA wants to use similar information to give robots true autonomy beyond any artificial intelligence developed to date. Sound like science fiction? It's not.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
8 
