Friction stir welding is a process that is quite a bit more complex than ordinary arc welding and far more complex than gas flame welding. The result being that it will cost quite a bit more to do it. So ships made with titanium will be exspensive indeed.
The fact that a process can be done in a manner to produce good rsults does not prove that it can be done in a cost-effective manner. So we should wait and watch and see if the process becomes economicly viable.
I believe I saw soemthing on TV about the Airbus A380 using some stir welding processes as well. I don't recall if it was on titanium pieces or Aluminum but it was interesting. The video of the actual process was impressive in how little it affected the workpieces being joined.
It would be interesting to note the limitations of the process as applied now and also to see what is being undertaken to make it more versatile. stir welding a 4 inch thick piece of Titanium hull section would certainly be an impressive feat.
Does anyone have details on this process? What I saw in the video on Airbuss looked like a spinning tool being forced into the intersection of two sheets of materials. As the tool progressed along the interface the rapid spinning created friction to plasticise the metals and it closed up around the tool on the trailing side. It made a very neat and clean looking bond. Presumably full strength.
The Soviets followed up with a robotic system that was able to weld the 4 in thick hull in a single pass. No doubt making the next variant in Titanium a "no brainer".
From the article, I didn't get a sense if the weld joint strength was stronger than/weaker than/or same as the surrounding material. There are obvious manufacturing advantages to this new friction welding, but I wonder how does the resulting material properties of this new process compare to the more traditional methods?
Sorry, but we evloved from using the old heat it up and smash it togther process of welding many decades ago. The current most popular processes use an electrical arc to create a metal puddle, if you will, to melt two metal pieces together. There are several forms of this, Arc welding, TIG and MIG just to name a few. The new process you mentioned in the article is still a very impressive development, however, if it tests out that it indeed has the long term structural integrity needed for ship building.
Ivan, the Soviets were willing to take chances with people's lives in all kinds of situations. It is good to see that a safer process is being developed.
The issue, as the article states, is with the tools. They have to operate in very adverse conditions.
As for the cost, most military systems that would use this technology and material have a very long life time. Just look at the B-52. My father worked on the design of it around the time I was born (and you can see that was a while ago). They are still flying and projected to be around for a long time.
@Ivan: Friction stir welding is a solid-state welding process and doesn't require either fill metal or a shielding gas. So you don't need to wear a space suit in order to do it. It also results in some beneficial microstructural changes which improve material properties. (Sometimes the process is applied to a surface specifically to induce these microstructural changes, rather than to weld one surface to another). It's a very promising process, and it's great to see this collaboration between industry, government, and academia to develop it.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
