Wow, Bill, ingenius fix, but I'm curious how you fit the fridge back in its place with a full-size office desk fan attached behind it. Any idea of why the fridge's own fan kept failing??
Actually the counterdepth fridge is no longer counterdepth. It sticks out from the wall a little to allow room for the desk fan. I'm more of a mechanical guy than electrical guy so I took the easier route of installing an external fan rather than figuring out why the fridge keeps burning out fan motors.
I applaud your mechanical touch, Bill, but I have to tell you, I would balk at paying top dollar for a counterdepth fridge only to have it stick out to accomodate an external fan. Runs counter-intuitive to my non-mechanical brain!
The counterdepth fridge will most likely be replaced with this years pending tax return. A real downside to the counterdepth fridge is that it doesn't have enough room for a week's worth of groceries. We have a family of 6, two of whom are teenage boys, both at 6'-2". Half of the food we buy gets kept in the garage fridge. The kitchen is plenty big enough for a regular size fridge, so extending out a few inches is really no problem.
Sounds like the solution is to go with a conventional-size fridge. I once owned an older home that was charming, but the kitchen was tiny and the fridge was an ancient tiny fridge that fit into a very small space -- not quite an icebox, but not much taller. I had to keep fixing it because there was nothing on the market that would fit the space. Luckily, my kids were small at the time.
A few years ago I replaced my aging fridge and was surprised to see how much the newer unit saved on my electrical bill. It was well worth the upgrade.
The fridge really isn't that old - 5 years. It survived the warranty period, so i guess it was a success for the manufacturer. It will probably be headed to Craigslist in a few weeks (I will, of course, give the new owner the desk fan).
Isn't it disappointing how expensive devices fail, just after warranty? As an electronics engineer, I am constantly faced with the battle between designing stout, long-lasting and robust designs, vs. the corporate marketing need for planned obsolescence and recurring revenue. I "get" it -- but I just don't like it.
But I suspect many appliance manufacturers today are taking it to a frustrating new level. For example, I have a garage Beer-Fridge that's nearly 30 years old and never had an issue. Meanwhile we're on the third Kitchen fridge in about 17 years.
Yeah planned obsolescence has got to be what it is. My "good" kitchen fridges have not lasted very long- 4th one in about 20 years. My garage "beer & deer" fridge is about 20 years old and still works fine as long as you know where to put different foods. Top shelf left side will freeze - don't put lettuce there, frosty beer on a hot summer day is quite nice. Anyway, the garage fridge holds the kitchen fridge overflow just fine. The ice maker in the garage fridge died, so I just removed it, insulated the hole in the door, and covered the hole with a plastic storage box lid - it almost looks like it was meant to be that way.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
