Misconception #12: Mountain Pass stopped producing rare earth elements in 2002
Mountain Pass has never stopped producing rare earth elements in the facility's almost 58 years of operation. However, in 2002 mining of fresh ore to feed the processing systems came to a halt due to a lack of tailings basin capacity and of a new permit to expand the old basin or build a new one. After numerous upgrades and revisions to resolve the issues, Molycorp is poised to restart mining of fresh ore as early as 2011 to ensure its mill can be fed by the middle of 2012.
The thing to keep in mind is that the mineral pricing is a two way street, especially when you are talking about the fact that we in the US have some of the largest deposits of some of these rare earths. The associated problem, and something that we can do do something about to minimized the games that other countries are playing, is to encourage the development of our own natural resources. The current environment is not conducive to that.
The green tariff is a pretty good idea, David. I could create a playing field that is closer to level. Yet I can't see it happening in our current political environment. Like any commodity, rare earths will sort themselves out as mines across the world are sparked into action by higher prices.
RE materials, such as neodymium and dysprosium (magnet material), are very rare in practical minable reserves (period). Yet, the small number of electric vehicles and wind turbines with high performance PM motors has been one reason for making the price of these RE materials increase dramatically. If EV and Wind turbines become more common as anticipated, there is question whether all the practical minable reserves (including reopening mines) can satisfy the demand. This is the subject worth looking into!
Rare Earth "Shortage" ???Rare earths are NOT rare, to the contrary, most are more common in the earth's crust than Copper. However, 'rare earths' are in the Lanthanum group of elements and therefore their ores are often comingled with radioactive elements such as Uranium and Thorium.As environmental rules were enacted in the 70's and 80's, rare earth refining was foolishly outsourced to nations without pesky EPA and OSHA regulations.
Our "Free Trade" policy exacerbated this outsourcing, so that today 90% of the refining capacity has migrated to nations that frankly don't care about worker exposure to radiation or what environmental damage is wrought when the tailings are dumped in streams and rivers.
A 'Green Tariff' on imports which are produced in facilities which do not abide by effective environmental or workplace safety regulations would level the playing field between offshore and domestic suppliers, and the increased competition would prevent artificial 'shortages' of these strategic materials.
I agree, Roddalitz. The advantage of replacing the materials is that they could find a replacement that is readily available and perhaps superior. If there's one thing we're learned from oil, shortages will just keep coming back and coming back.
Although REEs may become readily available again, the experience and knowledge gained by replacing them may help to create far better magnets using REEs.
China needs us way more than we need them. Somebody is playing games. If someone would "follow the money" ---? I think we could find out why US is so complacent about this.
It's amazing the influence that commodity markets is playing on design and manufacturing. It would be great if supply and demand, rather than external factors, would be the driving force in the cost of materials such as rare earth magnets. Anything close to an 8-9% increase in the price of servomotors for 2012 would be significant.
Good points, Kristin. Saudi Arabia is facing a similar fate. They have voiced concerns that if oil stays above $80 per barrel, the world will seek alternatives. They apparently wanted to keep oil down at $80, but they have been unsuccessful. At the high rates, they're correct, the world will find alternatives.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
