Jon Titus
User Rank
Software helps provide a good start
Jon Titus   4/2/2012 12:01:24 PM
Because semiconductor manufacturers make complicated devices and want designers to use them, they create development tools and provide source code that illustrates how to use these devices. I'd say almost all MCU and programmable-sensor companies offer hardware and software to help engineers and product designers get off to a good start. In most cases, open-source code provides a way to start with a core of working software. Of course, the code might run optimally only on the MCU-maker's chips.

User Rank
Battar   4/1/2012 2:31:34 AM
Rotating the chip itself in relation to hard/soft iron can dramatically improve performance. We have a design which uses a compass in close proximity to a brushless motor. It isn't intended to provide a true heading, but does monitor rotation.

User Rank
Re: New Sensors
williamlweaver   3/30/2012 8:22:34 AM
Thanks for this @Jon. With the increased availability of compact, integrated sensors and low-power computing, I expect the boom into "sensor fusion" is just starting. I'm delighted to read that Freescale did all of the difficult calibration analysis and created an on-board algorithm. The application note you linked even includes the source code for the calibration algorithm they developed. Kudos to Freescale for making their code open so it can be reviewed, modified, improved, and adapted by the sensor community. I hope they can be an example for other instrumentation manufacturers. 

User Rank
Re: New Sensors
JimT@Future-Product-Innovations   3/30/2012 1:21:10 AM

One recent contract design I did for a military contract placed an Ecompass on the main board of a portable GPS device.  True, that multiple subsequent GPS fixes will provide a compass heading, the need was for a foot soldier who may be hunkered down in a foxhole, and needed direction.  From the designer's perspective, many things can affect the Ecompass performance as Jon pointed out:  shields, capacitors, and any Fe based components. 

But two surprises were the screws and the Stainless steel shields. First, the screws were expected to wreak havoc with the Ecompass, but careful placement of the SMD to be equidistant between two screws proved sufficient .  Test readings  still came thru perfectly. 

The second surprise was the SS shields, and we went to great lengths to requalify new, NiAg  shields as engineered replacements.  Halfway into the effort to requalify  NiAg, one of the techs put a white-board magnet on the rev 1 stainless steel shield being phased out.   It didn't stick.  Foolishly, I took for granted without actually checking the metallurgical properties of the grade of SS shields, that they in fact did not possess any iron and did not affect the Ecompass performance any differently that the newer Nickel Silver shields.  Didn't do my homework and it resulted in a lot of extra work for no reason.

User Rank
New Sensors
naperlou   3/29/2012 9:28:25 AM
Jon, these new sensors make it much easier to include new functionality in a device.  I have been impressed with the Xtrinsic series since I first worked with it.  Good article.

Partner Zone
Latest Analysis
A panel on cybersecurity at ARM TechCon called for regulations to protect the security of connected devices.
Do you wear your ugly Christmas sweater while fighting zombies, or simply chill in front of your homemade entertainment center while your automated cat feeder keeps your feline friend at bay? Whatever you prefer, one of the following gadgets is sure to get your DIY motor running.
The design of products has been altered altogether through 3D printing. Parts that couldn’t be produced at all before 3D printing came along are often superior to conventionally produced parts.
Marine mussels and their interaction with the ocean environment has inspired a breakthrough in developing a nontoxic coating for organic electronic components that also could speed up the manufacturing process.
The Innovation Challenge Awards had one run-away winner at ARM TechCon 2016. Of the six awards presented, one company walked away with four.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course November 8 - 10:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service