Wikipedia has a good article about FRAM technology and it notes Ramton has worked with Texas Instruments for over 10 years, so that also might explain TI's interest in replacing high-power Flash memory and SRAM with FRAM. See: http://en.wikipedia.org/wiki/Ferroelectric_RAM.
Thanks, Jon, for that info. That makes sense. Back in the day when I covered memory, I used to wish I could write more about FRAM since it seemed like such a nifty technology for specific applications. That adjustable partitioning looks especially useful.
Hi,Ann. I bet TI put the FRAM in the MSP430 first because this MCU appeals to engineers who need to save as much power as possible. Because the FRAM operates from a 1.5-volt supply, it doesn't require a charge-pump circuit to produce the higher voltage needed by flash memory. That saves energy right away. According to TI, the FRAM section reduces memory power use by a factor of as high as 250 times. The FRAM also has faster throughput for read/write cycles and a very long life for such cycles. One additional capability--as noted already in a comment--gives programmers the capability to divide memory as they choose and adjust the partition as storage needs change. The entire memory-address range operates within the FRAM. So if you need only 1 kbyte of storage for temporary data, you can have 15 kbytes left for a program.
Thanks, tekochip and Chuck. I didn't realize that licensing issues were one of, if not the, major hindrance to wider adoption of FRAM. I'm still curious to know why TI put it in this MCU vs some other one.
I agree, Ann. Everybody on the electronics and materials beats seemed to be writing about FRAM for a decade before anything happend. TI finally incorporated it into a microcontroller about a year ago.
MSP430 continues to push the state of the art in power consumption. Interesting that they chose the name "Wolverine," although it apparently did not help the University of Michigan during March Madness.
I believe using FRAM came from Ramtron finally being able to free up its licensing and other business concerns. I was fortunate enough to use a FRAM part recently and it performed exactly as described on the label. Other than the low current capability the technology also allows you to have a very free memory map, and interesting features like self-modifying code. TI really has something, rather than just introducing a faster/smarter micro, they truly have a new innovation.
Jon, interesting that the MSP430 Wolverine uses FRAM. I remember writing about this memory type years ago, but it never seemed to catch on in a big way although its benefits were obvious. Any idea if that's changed? Or why TI chose it for this specific MCU?
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
