Wikipedia has a good article about FRAM technology and it notes Ramton has worked with Texas Instruments for over 10 years, so that also might explain TI's interest in replacing high-power Flash memory and SRAM with FRAM. See: http://en.wikipedia.org/wiki/Ferroelectric_RAM.
Thanks, Jon, for that info. That makes sense. Back in the day when I covered memory, I used to wish I could write more about FRAM since it seemed like such a nifty technology for specific applications. That adjustable partitioning looks especially useful.
Hi,Ann. I bet TI put the FRAM in the MSP430 first because this MCU appeals to engineers who need to save as much power as possible. Because the FRAM operates from a 1.5-volt supply, it doesn't require a charge-pump circuit to produce the higher voltage needed by flash memory. That saves energy right away. According to TI, the FRAM section reduces memory power use by a factor of as high as 250 times. The FRAM also has faster throughput for read/write cycles and a very long life for such cycles. One additional capability--as noted already in a comment--gives programmers the capability to divide memory as they choose and adjust the partition as storage needs change. The entire memory-address range operates within the FRAM. So if you need only 1 kbyte of storage for temporary data, you can have 15 kbytes left for a program.
Thanks, tekochip and Chuck. I didn't realize that licensing issues were one of, if not the, major hindrance to wider adoption of FRAM. I'm still curious to know why TI put it in this MCU vs some other one.
I agree, Ann. Everybody on the electronics and materials beats seemed to be writing about FRAM for a decade before anything happend. TI finally incorporated it into a microcontroller about a year ago.
MSP430 continues to push the state of the art in power consumption. Interesting that they chose the name "Wolverine," although it apparently did not help the University of Michigan during March Madness.
I believe using FRAM came from Ramtron finally being able to free up its licensing and other business concerns. I was fortunate enough to use a FRAM part recently and it performed exactly as described on the label. Other than the low current capability the technology also allows you to have a very free memory map, and interesting features like self-modifying code. TI really has something, rather than just introducing a faster/smarter micro, they truly have a new innovation.
Jon, interesting that the MSP430 Wolverine uses FRAM. I remember writing about this memory type years ago, but it never seemed to catch on in a big way although its benefits were obvious. Any idea if that's changed? Or why TI chose it for this specific MCU?
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
