Oh yeah, by the way, that switch...... Did this tech go on to become an elected political official in charge of domestic financial policy? Oh yeah, by the way, the financial regulations that are supposed to prevent these economic meltdowns....
What's up with the guy knowing the switch was broken and not saying anything until you to got shocked. Some people just don't think. That's so not funny.
As a freshout designing high voltage circuits for military radar system, some of things I was taught was to work with one hand behind my back, no jewelry (especially if it dangled), don't reach over my circuits. There were many scary stories about carelessness that got people hurt or killed. Never got shocked never had a desire to either. I always remembered to put up my danger high voltage signs and didn't take anything for granted. While I don't design many circuit over 100K anymore I still carry and follow those rules with me today.
Seems you should have followed your own advice prior to learning the hard way! When it comes to anything above 48VAC, I check thrice!. Another lesson: I used to work for a hosiptial fixing these HUGE indistrial washers that used relay logic and stepper switches. No 5Volt logic here - all the ciruits were 120VAC and some were 208VAC. I had to check the panels hot in order to trace down the anomolly. One day my wedding ring got caught on a relay terminal just as it turned on. OUCH. From that day on, I always take off my wedding ring, watch band or anything metallic. Even with 5-Volt logic, you can draw some considerable current from these SMPS, easily frying traces and your finger. Word!
ANyone who is a tech should have learned this procedure by heart -
Turn it off, lock it out and then get your voltmeter and make sure it is really off.
Built, installed % service industrial equipment and that is the only way to avoid getting shocked. Generally the shocks don't hurt too bad, but the back of your head does tend to suffer from the reaction...
Makes me wonder how this tech got the job in the first place - he seems rather inept. At least the engineer who was shocked was not badly injured. Something like this could have really been ugly.
Gosh, this reminds me of the Inspector Jacques Clouseau sketch from The Pink Panther Strikes Again:
Clouseau: Does your dog bite? Hotel Clerk: No. Clouseau: [bowing down to pet the dog] Nice doggie. [Dog barks and bites Clouseau in the hand] Clouseau: I thought you said your dog did not bite! Hotel Clerk: That is not my dog.
All you home improvement enthusiasts out there should take note. No matter how adept you are are understanding electrical currents, this is still always a danger with home repairs. My husband, who's not an engineer, but a pretty handy guy, has learned this lesson the hard way as I'm sure many of our readers have over the years. Broken switches and nasty shocks are definitely no fun.
UK-based Plastic Logic and French company ISORG have created what the pair tout as a first in flexible printed electronics: a large area, conformable, organic image sensor printed on plastic.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
