Much as I enjoy writing about spacecraft and airplanes, I wouldn't fly in this either. It's too small and I hate flying in small planes. The 747 is the only aircraft I've ever felt safe in.
I agree, Ann. We didn't have a clear vision for the Shuttle mission that I can recall. I think it was just that we were doing experiments in space. So I'm not surprised that fizzled out.
That's exactly the sort of thing I mean by PR, and it sure does work. But you're right, there has to be a clear vision before all that effort can have an effect.
I think the PR -- or even just a clear vision -- is critical. Congress members will support programs that their constituents believe in. To bolster the space program in the 60s, NASA made the astronauts into celebrities, even heros. It was quite a PR effort involving photo spreads in "Life." It worked.
I had the chance to talk to Burt Rutan at an Experimental Aircraft Association Convention in the '80's. I would trust his Engineering judgement over the next 20 people at NASA. The culture at NASA could not have come up with this solution.
I think Mr. Rutan once commented that NASA would spend more than their Scaled Composites' whole budget just to study the concept.
If Burt Rutan says its OK, I would fly it in a minute.
Given unlimited money, would you pre-book a flight on one of these? Given Branson and Musk's record, I wouldn't bet my life on one.
Hopefully they can take lots of money from easy marks (err, I mean forward thinking crazy rich folks) creating a space tourism market (or at least steal some of the market from the Russians). Then perhaps their company can translate their platforms to deliver scientific payloads into space inexpensivly. Then we all will benefit.
It's a shame that NASA has become an under-funded joke, leaving this our best hope of staying in space.
It's mostly all CF because the weight advantage of CF and only using one material cuts inter material stresses, a particularly bad trait of CF so best not mix it with other material.
It's using a Core!!! Of course it uses cores probably of many types. One problem in the vaccum of space the air pressure inside the cores is a serious problem especially with honeycomb. It can make the skin explode so would be interesting on how they handled that.
I learned some cool composite tricks from Rutan he used in his early carnard wing homebuilt aircraft designs he started his career with back in the 70's before he became the rockstar he is now which he richly deserves.
It shows what 1 man can do given, making the freedom to do the impossible, will. And show big corps for what they are, useless to do anything really new.
Like the car industry bringing out big, bloated overpriced, weight EV's because they really don't want them being made or be successful.
This article prompts me to think about the next phase of Virgin's business venture in space. Along with future sub-orbital space science missions and orbital launches of small satellites, I've read where Virgin Galactic is also hoping to offer orbital human spaceflights as well.
They couldn't ask for a better company to do the flight tests on the composites. Scaled Composites knows more about this technology than anyone -- they built the Voyager aircraft that flew around the world without refueling in 1986.
A new battery design, which replaces lithium with abundant and low-cost elemental sulfur, is still in its nascent stages but shows real promise for giving batteries more energy potential.
PTC will offer a virtual desktop environment for its Creo product design applications, potentially freeing engineers to run them from remote desktops on a variety of operating systems and mobile devices.
The push to achieving more intelligent, integrated manufacturing is putting a strong focus on networking and connectivity as key enabling technologies.
Now that solar and wind harvesting technologies are a thriving market, researchers are seeking other environmentally related energy sources for which they can create harvesting devices.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
