Rob, I've used Super Glue, too. I once had a horrible knife wound in the palm of my hand (don't try to catch sharp knives when you drop them, those suckers will slip right through your hand.....IIIIEEEW) and with just a little dab I had my hand back together. It's not a recommendation, it's just an experience I had.
Moha, thanks for your valid input. I think most of us may come across such adhesive problems with bandage or cotton over the wound. Even I had struggled many times for removing these adhesive materials from skin and wound. Next time I will let you know whether it's effective or not.
moha, thanks for your input. Using alcohol to remove adhesives from intact, uninjured skin definitely works. But your pain threshold must be a lot higher than mine: I would not put salt water anywhere near a wound. Also, there are coating cotton bandage materials with a slicker surface that are less likely to stick to a wound.
A simple way to remove adhesive bandages painlessly, is to apply alcohol to the edge of the bandage with a cotton swab. The alchol will release the adhesive, and the bandage can be pulled away from the skin as you wipe the swab back and forth at the skin/bandage interface. If the cotton pad on the bandage has absorbed body fluid and is now stuck to the wound, salt water applied to the pad with an eye dropper will shortly soften the matrix holding the pad to the wound.
Since this material is sold to hospitals, not to individuals, I'd bet it costs a lot more than Band-Aids, Chuck. But maybe we'll eventually see a lower-grade version for consumers some day.
Thanks for your input everyone. This material is designed for fragile skin undergoing major trauma: skin that is continually abraded by colostomy bag tubes, or open wounds, sometimes chronic ones, or skin that has recently been cut in surgery, for example. So not only does it stick easily, but it also removes easily. I'm sure it would work on more everyday minor wounds and cuts, although probably not on dental bridges.
This is a great idea. I won't have to use Super Glue on my kids' cuts any longer. In my lifetime there has only been one advance in home-based cut care -- Super Glue. It's good to see an advance that isn't as weird as Super Glue. Now if only they could come up with a home-based solution to putting a dental bridge back in place. My dentist doesn't recommend Super Glue, though she did say some of her patients have tried it.
Current Adhesive coverings for wounds cause major skin damage. My mom had some used on her in an operation she had. She had major skin lacerations 4 in by 6 in on either side of the operation. Because she had moved (minor moves) there were small cuts where the skin had torn in 1mm thin stripes alone the supporting strings in the strip of adhesive. It was painful for her and horrible image for the rest of us. Even with that risk supposedly wounds heal faster with adhesive strips supporting the wound.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
