Jon, I didn't realize the legal implications of discussing product problems with customers. Hard to believe something as simple as quizzing a customer about a design flaw could backfire.
John, I've had the same experience way too many times with both manufacturers and big-box stores. The cruncher here is that it's for a safety device that could save you and your family's lives--or not. While I would generally agree with what Jon Titus says about lawyers, etc., regarding product defects, the safety device factor is why I'm so boggled that this can be sold in a state that mandates their use.
And to the other John, yes we do need these: California uses natural gas, and, in my area, propane (LNP).
Chuck, that's unfortunately my experience with big-box stores, as well as with being a consumer in a major metro area. I'm glad to be now living in a small-town type environment where the local stores don't carry a huge variety, but you can order what you need. In this setting, they can't get away with really lousy products because everyone talks to everyone about it, and stores are dependent on a smaller number of local customers, who are often their neighbors, their doctors, their kids' teachers, their grocery store clerks. It's a very different world.
I'd guess this is a classic case of two errors in one. The mechanical engineer who designed the latch assumed that nobody would ever put the base on the unit without installing a battery first, so he/she never tried that combination. The packaging engineer, who didn't talk to the ME, wanted to save space in the package so he/she specified that the base should be installed. This is why you always have "nonstandard application" testing done, to make sure that using the product in a plausible, yet nonstandard way, does not cause it to fail (within obvious limits of safety).
I would imagine we can take your story and multiply it a thousand times. I would think the inspection of outsourced products would be more diligent rathe rthan less so. But I guess everybody's busy, so it's just grab the products and go.
Based on my understanding of the submitter's description about this "design flaw", the solution is to provide a large bold print warning tab or label that needs to be removed prior to installation which warns if installation is done improperly device will be unuseable. The real problem is not the design, but the lack of a warning about a specific design feature that is not intuitive to the average DIYer.
I would probably not read the installation instructions (thinking... what could be complicated about this?) unless I saw a large warning tab that needed to be removed before installation. Then I would study the instructions to understand the warning.
Interesting points about manufacturing in far east or other lower-tier sourcing. I don't tend to take the suff for granted, but didn't think about INTENTIONAL design changes.
Years ago, I had a young business unit manager show me a print package from a company in Taiwan selling a turn-key design, and manufacture of a commodity commercial connector product. I reviewed the design, corrected some tolerance stack-up issues and wrote-out detailed recommendations on technical program management/purchasing defining tooling ownership, tooling quality, contract terms tied to milestone deliverables, auditing the manufacturing location, first article inspections, etc.
I didn't hear any more about it for OVER A YEAR until he left the company. His replacement manager came across my memo of recommendations in the file. He laughed and practically cried. He explained that my advise was not taken, but virtually EVERY WAY that the company could have been ripped-off they were. He claimed the measures I defined to protect the company would have either protected the company or shut-down the losses early in the process. The "supplier" company had taken $50,000 for tooling the product line and evaporated. The supplier company bascially became an elaborate scam. Working overseas, even contracts without the umbrella protection of the Uniform Commercial Code overseas become difficult to enforce if jurisdiction and venue are not clearly defined.
To continue with the story, the new manager started over with another company, worked with me to follow a step-by-step game plan, and successfully launched the product. It took awhile for the company to dig-out of the losses from the first failed attempt by the previous manager, but they did. The original supplier and money was never found. I don't believe the first manager was dirty, I believe he was just inexperienced and thought I was being overly paranoid causing a more awkward process.
John: Many companies will not acknowledge receiving a complaint about a product defect, let alone reply to ask about your experience. Corporate lawyers tell them doing so would admitting to a design flaw and liability, and open them to lawsuits.
That's definitely true, Jon. I've begun to think that changing smoke and CO detector batteries is one of the most hazardous household tasks. Falling off ladders or a chair, just to change a 9V battery, which seem to be universal in smoke detectors, or AA in CO. Gotta be a better way. Plus, the change-out every year thing is a smart marketing campaign on the part of the battery companies. The 9Vs will actually last much longer than that. Too bad it's not like the old days where I could take the old smoke detector batteries and put them in my transistor radio. Now the single-chip IC xsistor radios take AAs.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
