Chuck, when searching for medical and healthcare robot subjects for this slideshow, I also noticed that there seem to be a lot of the exoskeleton models, far more than the two shown here (or four, if you count Slides 8 and 10, Toyota's two different Walk Assist models). It does look like these have been increasing over the last few years.
Al, that's scary--I've heard the same thing about surgical instruments not coming back out of patients' bodies. And I agree about the need for rigorous testing for such solutions. OTOH, there are already protocols in place for such testing in medical equipment. I also agree that the potential for decreasing the truly abominable error rate of hospitals is compelling.
Great slide show, Ann. I'm intrigued by what appears to be the growth of so-called "exoskeletons." I would classify four of these devices as exoskeletons. All seem to use some kind of closed loop feedback. Are we starting to see more of this technology?
Ann, I can't remember all of the details but I remember from the interviews that leaving surgical instruments "behind" inside patients was identified as a major cause of malpractice claims. As with any software-based solution, obviously there needs to be extensive testing to validate the design and system reliability/accuracy, but there is no question that robots/machines can be more consistent and create fewer errors than human workers. But there is also just cause for caution in adopting these kinds of technological solutions.
Thanks, Al. That's a very interesting use of robotics in hospitals, which are riddled with human error to the tune of 100,000 or more deaths per year in the US alone caused by those errors. Automating all the many functions that hospital personnel must do sounds like a potentially wonderful app. I'm sure someone will criticize this concept and worry about parts failures--I did when first encountering the idea of robot surgeons--but right now the human performance specs are pretty lousy, and I bet robots could best them.
Ann, Interesting stuff. DN did an article a couple years ago featuring Robotic Systems & Technology and an interesting robot, PenelopeCS, working to revolutionize the way hospitals manage their inventory of surgical instruments. Penelope CS automates key functions in the hospital's sterile supply department where used/dirty surgical instruments are cleaned, sorted, inspected and repacked into containers to be sterilized for the next procedure.At that time, they said that robots in the operating room but primarily teleoperated devices that basically serve as sophisticated power steering for the surgeon. RST was developing technology centered on designing machine vision routines for surgical instruments and the intelligence built into its software to recognize and organize the instruments. They were working on really a new kind of robotics in the sense that it's more involved with people. The goal was to advance both robotics and hospital efficiency using a man-machine partnership.
gsmith, we've discussed this issue is some other threads. There are extremely strict rules for machines, as well as for people, who operate on us, as well as for all the materials that contact our skin, as well as for drugs, etc. etc. A surgeon could come in drunk or a component could fail during surgery. I don't know what the relative probabilities are of either one occurring. Personally, I think I'd trust the robot. In any case, that's what regulations are for. The Intuitive Surgical website (makers of da Vinci) has info on this.
Some cars are more reliable than others, but even the vehicles at the bottom of this year’s Consumer Reports reliability survey are vastly better than those of 20 years ago in the key areas of powertrain and hardware, experts said this week.
Many of the materials in this slideshow are resins or elastomers, plus reinforced materials, styrenics, and PLA masterbatches. Applications range from automotive and aerospace to industrial, consumer electronics and wearables, consumer goods, medical and healthcare, as well as sporting goods, and materials for protecting food and beverages.
While many larger companies are still reluctant to rely on wireless networks to transmit important information in industrial settings, there is an increasing acceptance rate of the newer, more robust wireless options that are now available.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.