In the first place locking out the run button is a NO-NO - Locking out the control circuit is NOT AN ACCEPTABLE METHOD.
MUST DEENERGIZE AND ISOLATE THE POWER CIRCUIT BY LOCKING OUT THE BRANCH CIRCUIT MAIN DISCONNECT SWITCH OR CIRCUIT BREAKER IN THE OFF POSITION. (If there is a disconnect sw. by the machine to facilitate maintenance work, it can be used to lock out)
EACH INDIVIDUAL WORKING ON THE MACHINE/DEVICE SHALL PUT HIS OWN LOCK.
DOUBLE CHECK THAT THE UNIT IS indeed deenergized before starting work.
Notes: Check written LOTO procedure of the facility where work is being done, but one can always insist on and use one's won lock.
Refer to NFPA 70 (NEC), NFPA 70E etc.
All technicians working with m/c and devices that utilize Kinetic and/or Potential energy (Electrical, Mechanical, Hydraulic, Pneumatic, spring energy etc )must be familiar with the equip. and study how to completely isolate all energy from that equipment they are working on.
Working on energized devices is a different ball game altogether, and not addressed here.
cvandewater, I too know of commercial divers who will not work on a ship until Tag Out Lock Out procedures have been followed and all keys are in the dive leader's wet suit. Ya gotta do whatever it takes!
One friend was a promising automotive mechanic until the day he got his right index finger caught in the serpentine belt. He was fired from the place where he just had started (after his education as automotive mechanic) and could not find work due to his handicap....
I heard many years ago that the diver crews working on a ship will only dive after receiving all ignition keys. Don't know if they also were tagging.
That company needs a good safety overhaul or something. The fact that somebody even had access to remove the lock is scary in it's own right. I was at a location once where a guy forgot to unlock. The machine was left inoperable until they reached him at home and made him drive an hour back to remove his lock.
That sounds like a good set of safety procedures, Jon. That should be the usual practice. I was really quite surprised by this Made by Monkeys posting. I would think if nothing else, employees would be careful with lock-outs simpley out of concern for fellow employees.
When I started work at a DuPont research lab back in '69, the company had a safety course for all new employees. We fought simulated chemical fires, put on Scott airpacks, practiced firts aid and learned about lockouts. We couldn't even take jars of chemicals from the store-room unless we had a rubber bucket in which to carry them. The company stressed safety at every turn. I saw some electrical apparatus with lockout upon lockout when many teams were on the site. As others have said, never trust someone else to ensure your safety.
This article reminded me of another thing that I had happen to me twice, and an acquaintance of mine lost his right hand...
When I was 16 I got a job at a Shell gas station near my parents house... This was back in the days when full service gas stations still existed in California. I was a gas station attendant/service truck driver (We were right next to a large shopping mall, and several times a week someone would leave their lights on and need a jump start...)
Anyway, we would always ask if we could check under the hood... We checked oil, radiator overflow tanks, power steering fluid, etc... We would check antifreeze if asked, and also the battery if asked (Sealed maintenance free batteries were not common in those day, I think only Delco had them that I ever saw.
Anyway, twice I would be under the hood checking things and right when I was reaching for the power steering cap, the idiot behind the wheel (1 woman, 1 man... So it was evenly divided between the sexes as to who were the biggest idiots...) started the car!
Most power steering pumps were fairly buried, and frequently you had to reach through an alternator belt to take the P/S cap off... That's how the guy I knew lost his hand...
I would ask if they wanted me to check under the hood, and if they said yes I asked if I could have the keys. After I gave the keys back, I would ask if they wanted their transmission fluid checked, because the car had to be running to do that.
I had several people get really mad at me, but when I explained why most were ok with it... I had maybe 10 or 15 people come back and complain to the station owner that I wouldn't check under their hood unless they gave me their keys... The station owner gave those complainers coupons for a discount on an oil change, and he would always come over to me and tell me I had another complaint... Then he would stare at me for a five count, and say that at least when he fired me I could hitchhike home with my choice of which hand I held out...
The thing people really need to remember is that there are a lot of idiots out there, and you have to protect yourself from them whenever you can...
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
