I had the same question--will the use of wind turbines get to a scale where what they are doing interferes with, or at least somehow affects, larger-scale wind patterns, i.e., climate. I suspect this has already been at least considered, if not studied yet.
For sure, there are not that many in use to cause a major change in the climate, but the use of the word ""yet" implies there could be.
For sure, setting up a windmill directly in front of another windmill would be foolish, as the energy removed by the first unit will never reach the second. That said, what affect will removing <enter the energy amount of your choice here> have on the climate long term? I posed the question only as it is an unknown to consider as we search for alternative sources to meet the ever-growing power needs of society.
Louis, I would find it tough to believe that we've got enough wind turbines on the planet yet to have an affect on climate, which is macro-scale, although it's an interesting question whether they might have an effect on weather, which is a local phenomenon.
At what point does the loss of mass in the blades and thus the loss of the flywheel effect begin to outweigh the benefits of lighter blades that start to spin faster in lighter wind, but stop sooner with the loss of wind? As to the birds, that is a good point, however, I was more interested in the affect on the climate when wind patterns are altered.I know that darn butterfly that flapped his wings in China last year caused us to have an unusually warm summer. >mild attempt at humor<
Thanks, Al, for that info about independent pitch control for responding to gusts faster and handling them better. And Aldo, thanks for the input about using genetic algorithm programming techniques for increasing efficiency.
As a side note, I was watching an episode of Terra Nova last week and suddenly noticed that the wind turbines they depicted as right inside the village were insanely small and incapable of providing the power they need, even when combined with solar panels. Of course, they would have had to put large enough turbines way outside the village, where they'd presumably get destroyed by marauding dinos.
Louis, I have wondered the same thing myself. I know that there's been a lot of debate about the harm done to birds, and I have read of some efforts to ameliorate those effects.
Thanks, kenish for that insight. I would guess that, with bigger blades, better optimization technology and possibly also an increase in power costs, that threshold will go up quite a bit.
Good points, Kenish. It will be interesting to see whether power costs increase. I would imagine conservation over the past few years must be having some impact. However, if EVs and Hybrids become plentiful, there will be more draw on the grid.
There's a huge wind farm near Palm Springs. It's interesting that 20+ years ago there were 10-12 distinctly different turbine designs. Nowadays about the only design in use is the 3-bladed turbine on a monopole mast. Only the size varies.
My understanding is turbines are often deliberately "parked". At low speeds the revenue from the power does not make up for the per-hour operating costs (wear and tear, maintenance, etc). I'm sure the windspeed threshold will decrease as the turbines become more reliable and/or power costs per kWh increase. (Southern California has very high electricity rates but also a surprising amount of wind power thanks to our topography).
Yep, Beth, that makes sense to use that technology to get the blades to follow the wind. It seems a natural direction to go in developing wind turbines. In a decade or two, our current wind tools may look quite primitive. We're probably only getting 10 or 15 percent of the possible energy from our current turbines.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
