HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 3/3
Rob Spiegel
User Rank
Blogger
Re: CAE plays a role in wind turbine blade design as well
Rob Spiegel   3/12/2012 3:15:17 PM
NO RATINGS
So far the tools to control the blades for optimum turn is still on the drawing table. Yet I can certainly see the need for it after driving by so many turbines that are sitting idle just because the wind isn't blowing in the right direction. I would imagine we'll see a ton of development in wind in the coming years.

Ann R. Thryft
User Rank
Blogger
Re: CAE plays a role in wind turbine blade design as well
Ann R. Thryft   3/12/2012 3:10:50 PM
NO RATINGS

Thanks for the input. Rob. I know you've written about alternative energy sources like wind turbines, which are relatively new to me. Making them larger makes sense, but solving the weight-to-size ratio problem sounds pretty major. I bet the CAE software has made a big difference there. And I bet it's also key in figuring out how to design the blades that optimize wind, as you describe.


Rob Spiegel
User Rank
Blogger
Re: CAE plays a role in wind turbine blade design as well
Rob Spiegel   3/12/2012 2:58:59 PM
NO RATINGS
Nice article, Ann. Turbines keep getting more efficient and more effective. Another area of research is going to create turbine blades that are optimized to gain the most of the wind. The blades are controlled to change position as the wind direction and velocity changes, the goal being to get the most efficient use of the wind at all times.

Ann R. Thryft
User Rank
Blogger
Re: CAE plays a role in wind turbine blade design as well
Ann R. Thryft   3/12/2012 1:48:15 PM
NO RATINGS

Sounds like the ability to design blades and other components using composites is probably highly dependent on that simulation ability. No doubt this is also a major contributing factor to why there's a big increase in the use of composites in so many apps, not just the fact that there are so many more versions of composite materials to choose from. Thanks for the info.


Beth Stackpole
User Rank
Blogger
Re: CAE plays a role in wind turbine blade design as well
Beth Stackpole   3/12/2012 1:36:07 PM
NO RATINGS
Absolutely Ann, there issues around aerodynamics and airflow as well as structural integrity and reduction in weight--all key factors that can be explored and optimzed in the virtural world with FEA, CFD, and other CAE software. With simulation, designers of these wind turbine blades can test out many more design options virtually, prior to investing the money to build physical prototypes, which is a huge expense, especially with the growing size of these blades and with all the new composite materials, which are costly.

Ann R. Thryft
User Rank
Blogger
Re: CAE plays a role in wind turbine blade design as well
Ann R. Thryft   3/12/2012 1:02:39 PM
NO RATINGS

Thanks Beth for weighing in about the simulation software used for wind turbine blade design. I would think that designing blades, root rings and other components of wind turbines must be quite a challenge, especially in alternative materials. It only makes sense that software is part of the design engineer's toolkit for making bigger blades possible.


Beth Stackpole
User Rank
Blogger
CAE plays a role in wind turbine blade design as well
Beth Stackpole   3/12/2012 8:03:06 AM
NO RATINGS
Seems like the Bayer MaterialScience technology has a lot of promise in terms of promoting wind turbine blade design. Along with materials, simulation software is also playing a huge role in perfecting wind turbine blade design and for pushing for much bigger, higher capacity blades. Click here to read about Sandia National Labs' research project effort to build a 100m blade, which in a traditional three-bladed turbine design, would take up a footprint of about two-and-a-half football fields in size. The massive blade is aimed at off-shore turbines.

<<  <  Page 3/3


Partner Zone
Latest Analysis
It's been two years since the Mac Mini's last appearance on iFixit's teardown table, but a newly revised version joins Apple's lineup this week.
More often than not, with the purchase of a sports car comes the sacrifice of any sort of utility. In other words, you can forget about a large trunk, extra seats for the kids, and more importantly driving in snowy (or inclement) weather. But what if there was a vehicle that offered the best of both worlds; great handling and practicality?
Kevin Gautier of Formlabs describes the making of a carbon fiber mold for an intake manifold, using a $3,300 3D printer, during Medical Design & Manufacturing Midwest.
Science fiction author Isaac Asimov may have the best rules for effective brainstorming and creativity. His never-before-published essay, "On Creativity," recently made it to the Web pages of MIT Technology Review.
Much has been made over the potentially dangerous flammability of lithium-ion batteries after major companies like Boeing, Sony, and Tesla have grappled with well-publicized battery fires. Researchers at Stanford University may have come up with a solution to this problem with a smart sensor for lithium-ion batteries that provides a warning if the battery is about to overheat or catch fire.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service