From the article, I didn't get a good appreciation for the Silver-Zinc batteries. It seemed like only the limitations prevailed. I'm wondering about the advantages of this technology and what specific application it should be used in.
Stephen, thanks for the definitions. I understand the contrasts between the military and consumer usage scenarios you mention, but how they apply to batteries wasn't clear; now it is. So it sounds like batteries have to stand up to this extreme "wait and hurry up" model.
On single use & military vs. civilian: Military applications cited appear to require shelf life of years to decades (presumabily in severe environmental conditons followed by total lifetimes of minutes to hours, possibily at extreme pulse currents and/or physical contitions, with extremely high reliability.
Civilian uses tend to have somewhat less severe storage life requirements, e.g. less that 1 decade, and longer duration (hours to years), less severe discharge requirements for primary (i.e. non-rechargable) battery systems, in far less severe environmental conditions.
Jack, military everything has to be more rugged and last longer--a lot longer. It also has to be fixable on the spot if at all possible. (That last probably doesn't apply to batteries.) Military vehicles now carry a ton of electronics and other stuff that needs to be powered, as mentioned in the first paragraph: advanced product designs for avionics, navigation systems, ordinance fuses, missile systems, GPS tracking and emergency/safety devices, shipboard, and oceanographic devices.
What I'd like to know is how "single-use" is defined as applied to batteries.
Does anybody know what the technical reasons are for the the differences between military and cilivian uses? Obviously, there are the harsh environment considerations, but I never realized there was such an underlying difference in basic technology.
I had the same thought as Beth: there might be some crossover apps possible from military uses to civilian uses, since there are a lot of parallels. Battery technologies have lagged for so many years, if not decades. It's great to see the military spearheading efforts to take a crack at improvements. It's also interesting to see thermal storage battery techniques--I just read something about thermal storage applied to solar energy.
I think such military technologies have to go for mass production in sake of public. We all are experienced energy crunch in our daily life at different instances in portable devices like Smartphone, Camera, laptops etc. So such long durability cells can yield more power for a long duration. By sharing such technologies to the public, I don't think there may be any security issues.
I know this battery technology isn't the same as the lithium ion batteries that the automotive industry is consumed with trying to find the best solution for EV vehicles. However, the thought occurs to me that there has to be synergies/best practices each side could bring to each other to advance innovation and future battery development. I'm wondering if there are open source communities or standards bodies promoting cross-pollination of ideas or research. Clearly advancing the cause of alternative battery design has huge implications, not just for the EV set.
Engineers at Fuel Cell Energy have found a way to take advantage of a side reaction, unique to their carbonate fuel cell that has nothing to do with energy production, as a potential, cost-effective solution to capturing carbon from fossil fuel power plants.
To get to a trillion sensors in the IoT that we all look forward to, there are many challenges to commercialization that still remain, including interoperability, the lack of standards, and the issue of security, to name a few.
This is part one of an article discussing the University of Washington’s nationally ranked FSAE electric car (eCar) and combustible car (cCar). Stay tuned for part two, tomorrow, which will discuss the four unique PCBs used in both the eCar and cCars.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.