"One very prominent manufacturer of aftermarket parts boasts that they re-engineered the part to eliminate the failure modes. Their replacement part can be had for as little as $43.00.
Which would you buy?"
In this case, a GM that I would repair the lamp in. :)"
Uhhh, I don't think so. The assembly consists of two pieces of plastic bonded together so well that they can only be separated destructively. I am going to cut two failed assemblies open to determint the exact failure modes, but these will not be suitable for reassembly.
I've repaired a lot of "non-repairable" things, and will probably repair these, but they won't be reusable.
Anatech also wrote:
"Saab makes a really cool car too, ..."
Uhhh, yeah. Click and Clack (Tom and Ray Magliozzi) described Saab as a car put together by designers who never looked at how anyone else was doing it. Battery under the driver's seat? Clutch out in front, under the radiator? How about those 1998-2001s which all had the premature transmission failure that required a $2700 replacement unit. There was a reason why GM dumped them, and a reason why no one else would have them.
"One very prominent manufacturer of aftermarket parts boasts that they re-engineered the part to eliminate the failure modes. Their replacement part can be had for as little as $43.00.
Which would you buy?"
In this case, a GM that I would repair the lamp in. :)
To answer a question like this, most of us require a lot more information to go on. After considering my experiences with well over 25 cars, the answer is easy. BTW, look at the "Black" or "Red" book values on cars after they are 5 years old. That is a reasonably reliable indicator on how much that model is worth.
You may have guessed our family has a lot of experience in the auto industry, and you would be right. In this case, that door was probably taken off another vehicle and maybe repainted to match. That is common practice and there is normally nothing wrong with that. And yes, the vehicle the door came from had this fault from when it was brand new. But, the used door is better than yours repaired in this case. The original door would never have been the same, and probably have been very noisy.
Other cars to consider? A KIA (one saved my life) or BMW. Saab makes a really cool car too, and they are quiet at speed (not a surprise considering they make fighter planes too).
Now I may have to retract my last post after reading a little more on the subject. Sorry about that--I am always the skeptic, sometimes in the wrong direction.
Hmm. Wait until we start tracing these faults to tin-whiskers due to the misguided European RoHS campaign.
Ooops. I'm sorry. We'ce already done that. Look for the reports on tin whiskers in the Toyota throttle-by-wire unit.
By the way, has anyone else noted that the rich-text posting editor doesn't work. My last post used the indent feature, but the indent was once the post went live.
Third –party component manufactures have no responsibility for the overall quality of an electrical system, because they have "no skin in the game", so to speak. They are trying only to peddle after-market modules.
Jim, you are painting the aftermarket with too broad a brush. Virtually all of the high-mounted brakelights on 2000-2006 Suburbans, Tahoes, Yukons, Yukon XLs, and CK-1500 pickups failed within a few years. The GM list price for that part is $223.00. (The GM parts counterman said "No, we don't think it's unreasonable to replace that part every few years for $223.00.) There is no ECO on this part--they sell you the same weak-sister part that you got originally.
One very prominent manufacturer of aftermarket parts boasts that they re-engineered the part to eliminate the failure modes. Their replacement part can be had for as little as $43.00.
It seems that the author have a good debugging knowledge and analytical skill. The entire malfunctioning happens because of the soldering problem and it implies to the accuracy in precession soldering.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 4
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
