HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 3/3
Charles Murray
User Rank
Blogger
Thank the structural engineers
Charles Murray   2/29/2012 11:15:45 PM
NO RATINGS
I don't know how hard the author was hit, or how he was hit, but it's interesting to note that minivans (such as the Odyssey) didn't have large sliding doors on the driver's side for many years because they couldn't provide sufficient torsional stiffness when they had big door openings on both sides (remember how minivans only had one sliding door a few years back?). Sounds like all that FEA work on the Odyssey's space frame did its job.

naperlou
User Rank
Blogger
Re: Faulty windows a result of the accident?
naperlou   2/29/2012 10:52:26 PM
Appliance repair men work in modules.  They will generally only replace defective FRUs.  We had a problem with one a while ago.  It was in a double oven.  The repair guy told us that the module was no longer manufactured, so he could not fix it.  He suggested replacing the oven.  Oh, by the way, the new ones were slightly different in size (same manufacturer, mind you). 

Well, I isolated the problem to a component, which would need to be replaced.  I decided to have the module repaired when we found that there were places that did that.  One of them was near by, so I took it in rather than shipping it.  It works fine now.  For about $150 I avoided a purchase of over $2,000.  It pays to fix, rather than to replace.

TomM
User Rank
Iron
Re: Faulty windows a result of the accident?
TomM   2/29/2012 4:31:11 PM
NO RATINGS
I am pretty sure the body shop installed a used door and suspect that the original owners of the door had the problem since it was new.

JimT@Future-Product-Innovations
User Rank
Blogger
Re: Faulty windows a result of the accident?
JimT@Future-Product-Innovations   2/29/2012 2:42:02 PM

Come to think of it, your opening line was, ",,,hit in the driver-side door".  I would speculate that the body shop may have opted for a non-factory-authorized replacement module after the factory window module was destroyed.  

Like Mr. Goodwrench always used to say, "Insist on Genuine {GM} Parts".  Third –party component manufactures have no responsibility for the overall quality of an electrical system, because they have "no skin in the game", so to speak.  They are trying only to peddle after-market modules.

JimT@Future-Product-Innovations
User Rank
Blogger
Re: Faulty windows a result of the accident?
JimT@Future-Product-Innovations   2/29/2012 2:35:02 PM
NO RATINGS

I've spent half a lifetime examining mother boards and solder joints under a microscope and have often found things that make me wonder where the QA process is at many world-class companies.  Your example of solder bridging is likely root caused as too much solder on the connector joints, and further root caused to poor stencil & pad design at the PCB layout stage.  

If you're familiar with high volume manufacturing of electronics, you know that each electrical component, (in this case, switches) comes from it's manufacture with a recommended PCB hole pattern, or a recommended solder-pad  layout if an SMD device.  Its up to the PCB designer to follow the recommendation, or the "fault" can be pointed to the switch manufacture for bad solder joint design. In the case of Honda, its surprising that solder bridging is occurring on a world class car like an Odyssey.

Ann R. Thryft
User Rank
Blogger
Re: Faulty windows a result of the accident?
Ann R. Thryft   2/29/2012 1:35:05 PM
NO RATINGS

I'm curious, too, about the origin of the solder bridge. It sounds like something that either was there to start with in the factory--but then shouldn't it have caused this problem a lot sooner?--or that it occurred at the body shop during the door's post-accident repair.


Beth Stackpole
User Rank
Blogger
Faulty windows a result of the accident?
Beth Stackpole   2/29/2012 6:57:10 AM
NO RATINGS
Was the solder bridge a result of the impact or was it a glitch that occurred unrelated to the accident? I have to applaud your detective work. I wish the larger pool of appliance repair men/women and mechanics had similar tenacity to stay on a problem!

<<  <  Page 3/3


Partner Zone
Latest Analysis
Get a load of these strange product designs. What's in the water these design engineers are drinking?
The Dutch are known for their love of bicycling, and they’ve also long been early adopters of green-energy and smart-city technologies. So it seems fitting that a town in which painter Vincent van Gogh once lived has given him a very Dutch-like tribute -- a bike path lit by a special smart paint in the style of the artist's “Starry Night” painting.
Cal Poly students use 3D printing to take flight -- and pass their class.
Celebrity engineer Grant Imahara will host a series of “webisodes” that will examine new technology and innovation from an engineer’s point of view.
The UX Italia video contest recognizes Italian machinery, technology, and other experience solutions that have contributed meaningful improvements to people’s lives and production processes. If you submit a three-minute video showcasing how the quality of Italian machinery's User eXperience is essential to your company's success, you just may win a trip to Italy.
More:Blogs|News
Design News Webinar Series
11/19/2014 11:00 a.m. California / 2:00 p.m. New York
11/6/2014 11:00 a.m. California / 2:00 p.m. New York
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Nov 17 - 21, Analog Design for the Digital World
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service