HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 3/3
Charles Murray
User Rank
Blogger
Thank the structural engineers
Charles Murray   2/29/2012 11:15:45 PM
NO RATINGS
I don't know how hard the author was hit, or how he was hit, but it's interesting to note that minivans (such as the Odyssey) didn't have large sliding doors on the driver's side for many years because they couldn't provide sufficient torsional stiffness when they had big door openings on both sides (remember how minivans only had one sliding door a few years back?). Sounds like all that FEA work on the Odyssey's space frame did its job.

naperlou
User Rank
Blogger
Re: Faulty windows a result of the accident?
naperlou   2/29/2012 10:52:26 PM
Appliance repair men work in modules.  They will generally only replace defective FRUs.  We had a problem with one a while ago.  It was in a double oven.  The repair guy told us that the module was no longer manufactured, so he could not fix it.  He suggested replacing the oven.  Oh, by the way, the new ones were slightly different in size (same manufacturer, mind you). 

Well, I isolated the problem to a component, which would need to be replaced.  I decided to have the module repaired when we found that there were places that did that.  One of them was near by, so I took it in rather than shipping it.  It works fine now.  For about $150 I avoided a purchase of over $2,000.  It pays to fix, rather than to replace.

TomM
User Rank
Iron
Re: Faulty windows a result of the accident?
TomM   2/29/2012 4:31:11 PM
NO RATINGS
I am pretty sure the body shop installed a used door and suspect that the original owners of the door had the problem since it was new.

JimT@Future-Product-Innovations
User Rank
Blogger
Re: Faulty windows a result of the accident?
JimT@Future-Product-Innovations   2/29/2012 2:42:02 PM

Come to think of it, your opening line was, ",,,hit in the driver-side door".  I would speculate that the body shop may have opted for a non-factory-authorized replacement module after the factory window module was destroyed.  

Like Mr. Goodwrench always used to say, "Insist on Genuine {GM} Parts".  Third –party component manufactures have no responsibility for the overall quality of an electrical system, because they have "no skin in the game", so to speak.  They are trying only to peddle after-market modules.

JimT@Future-Product-Innovations
User Rank
Blogger
Re: Faulty windows a result of the accident?
JimT@Future-Product-Innovations   2/29/2012 2:35:02 PM
NO RATINGS

I've spent half a lifetime examining mother boards and solder joints under a microscope and have often found things that make me wonder where the QA process is at many world-class companies.  Your example of solder bridging is likely root caused as too much solder on the connector joints, and further root caused to poor stencil & pad design at the PCB layout stage.  

If you're familiar with high volume manufacturing of electronics, you know that each electrical component, (in this case, switches) comes from it's manufacture with a recommended PCB hole pattern, or a recommended solder-pad  layout if an SMD device.  Its up to the PCB designer to follow the recommendation, or the "fault" can be pointed to the switch manufacture for bad solder joint design. In the case of Honda, its surprising that solder bridging is occurring on a world class car like an Odyssey.

Ann R. Thryft
User Rank
Blogger
Re: Faulty windows a result of the accident?
Ann R. Thryft   2/29/2012 1:35:05 PM
NO RATINGS

I'm curious, too, about the origin of the solder bridge. It sounds like something that either was there to start with in the factory--but then shouldn't it have caused this problem a lot sooner?--or that it occurred at the body shop during the door's post-accident repair.


Beth Stackpole
User Rank
Blogger
Faulty windows a result of the accident?
Beth Stackpole   2/29/2012 6:57:10 AM
NO RATINGS
Was the solder bridge a result of the impact or was it a glitch that occurred unrelated to the accident? I have to applaud your detective work. I wish the larger pool of appliance repair men/women and mechanics had similar tenacity to stay on a problem!

<<  <  Page 3/3


Partner Zone
Latest Analysis
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
At Medical Design & Manufacturing Midwest, Joe Wascow told Design News how Optimal Design prototyped a machine that captures the wing-beat of a duck.
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service