HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 3/3
Charles Murray
User Rank
Blogger
Thank the structural engineers
Charles Murray   2/29/2012 11:15:45 PM
NO RATINGS
I don't know how hard the author was hit, or how he was hit, but it's interesting to note that minivans (such as the Odyssey) didn't have large sliding doors on the driver's side for many years because they couldn't provide sufficient torsional stiffness when they had big door openings on both sides (remember how minivans only had one sliding door a few years back?). Sounds like all that FEA work on the Odyssey's space frame did its job.

naperlou
User Rank
Blogger
Re: Faulty windows a result of the accident?
naperlou   2/29/2012 10:52:26 PM
Appliance repair men work in modules.  They will generally only replace defective FRUs.  We had a problem with one a while ago.  It was in a double oven.  The repair guy told us that the module was no longer manufactured, so he could not fix it.  He suggested replacing the oven.  Oh, by the way, the new ones were slightly different in size (same manufacturer, mind you). 

Well, I isolated the problem to a component, which would need to be replaced.  I decided to have the module repaired when we found that there were places that did that.  One of them was near by, so I took it in rather than shipping it.  It works fine now.  For about $150 I avoided a purchase of over $2,000.  It pays to fix, rather than to replace.

TomM
User Rank
Iron
Re: Faulty windows a result of the accident?
TomM   2/29/2012 4:31:11 PM
NO RATINGS
I am pretty sure the body shop installed a used door and suspect that the original owners of the door had the problem since it was new.

JimT@Future-Product-Innovations
User Rank
Blogger
Re: Faulty windows a result of the accident?
JimT@Future-Product-Innovations   2/29/2012 2:42:02 PM

Come to think of it, your opening line was, ",,,hit in the driver-side door".  I would speculate that the body shop may have opted for a non-factory-authorized replacement module after the factory window module was destroyed.  

Like Mr. Goodwrench always used to say, "Insist on Genuine {GM} Parts".  Third –party component manufactures have no responsibility for the overall quality of an electrical system, because they have "no skin in the game", so to speak.  They are trying only to peddle after-market modules.

JimT@Future-Product-Innovations
User Rank
Blogger
Re: Faulty windows a result of the accident?
JimT@Future-Product-Innovations   2/29/2012 2:35:02 PM
NO RATINGS

I've spent half a lifetime examining mother boards and solder joints under a microscope and have often found things that make me wonder where the QA process is at many world-class companies.  Your example of solder bridging is likely root caused as too much solder on the connector joints, and further root caused to poor stencil & pad design at the PCB layout stage.  

If you're familiar with high volume manufacturing of electronics, you know that each electrical component, (in this case, switches) comes from it's manufacture with a recommended PCB hole pattern, or a recommended solder-pad  layout if an SMD device.  Its up to the PCB designer to follow the recommendation, or the "fault" can be pointed to the switch manufacture for bad solder joint design. In the case of Honda, its surprising that solder bridging is occurring on a world class car like an Odyssey.

Ann R. Thryft
User Rank
Blogger
Re: Faulty windows a result of the accident?
Ann R. Thryft   2/29/2012 1:35:05 PM
NO RATINGS

I'm curious, too, about the origin of the solder bridge. It sounds like something that either was there to start with in the factory--but then shouldn't it have caused this problem a lot sooner?--or that it occurred at the body shop during the door's post-accident repair.


Beth Stackpole
User Rank
Blogger
Faulty windows a result of the accident?
Beth Stackpole   2/29/2012 6:57:10 AM
NO RATINGS
Was the solder bridge a result of the impact or was it a glitch that occurred unrelated to the accident? I have to applaud your detective work. I wish the larger pool of appliance repair men/women and mechanics had similar tenacity to stay on a problem!

<<  <  Page 3/3


Partner Zone
Latest Analysis
The new small-form-factor EZ-BLE PRoC (Programmable Radio on Chip) module is a derivative of the existing PRoC BLE Programmable Radio-on-Chip solution. The EZ-BLE PRoC module integrates the programmability and ARM Cortex-M0 core of the PRoC BLE, two crystals, an onboard chip antenna, a metal shield, and passive components.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
More:Blogs|News
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
5/7/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
May 4 - 8, Designing Low Power Systems using Battery and Energy Harvesting Energy Sources
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service