I agree, Kevin. I think the area where OS techniques will affect medical devices is in the research and development arena, rather than FDA-qualified products. Anything that can speed up and simplify the realization of such complex and critical systems is a Good Thing.
Considering the Open Source development of Medical Devices, such as surgical robotics or others even less complicated, the most difficult hurdle to realization of such a goal is the integration of the development process in an open sense with the requirements of the FDA. The typically tight controls and meticulous documentation and process standards imposed on PMA medical devices may render truly open source development, such as that found in the software world, an unreachable star.
Tim, I think you've got a really good point. I'll bet that the makers of da Vinci, the leading commercial surgical robot, have some extremely high QA standards. Think of the lawsuits! OTOH, whether it's a bearing failing in a robot, or your surgeon arriving drunk, without enough sleep, or having just had a fight with his/her spouse, seems to me like a tossup.
Surgical robots like the DaVinci are of course not autonomous -- they're under direct control of the surgeon(s), usually in the same room as the patient, and act as "enhanced" versions of tools they've used for decades or centuries: scalpels, cauterizers, retractors, etc. They have to undergo the same VERY rigorous validation processes that any other medical device does, including failure-mode analysis and risk management. They are designed to fail safely -- like surgeons themselves, the operating principle is "do no harm." In the event the device stops working, the surgical team can quickly remove the robot and perform the surgery manually.
Intuitive Surgical's DaVinci is a brilliantly designed and built tool, the first successful second-generation surgical robot (previous ones were primarily surgical assistants). Its very high price tag reflects the research and care that company put into making it so good. Applying the open-source idea will almost certainly allow the next generation to be developed faster and produced more cheaply.
I'm a consultant engineer and I work from my home.
Someday surgeons will be able to work from their homes. In fact, they will be able to perform a surgery any place from any place. I saw a city to city test on this - I can't remember off hand. Now this concept is WIDE.
Just don't give me a robotic nurse in the recovery room! If all I saw was machines when I came to after my surgery, I wouldn't have made it. You need to see those recovering angels at this low point.
One thing is if the robot makes a mistake. My fear is of mechanical failure during the operation. I try not to think about what would happen if during mid operation a servo goes out or a bearring siezes up. Would you call a maintenance tech to work on it? It truly brings to light the need for a top notch PM program.
Your verbal imagery makes me double over in anticipatory pain, Naperlou. However, I think that as robotics R&D as applied to automated surgery and/or telemedicine increases, the (perhaps irrational) thought that I for one have, namely, what the heck happens if these things make a mistake, will disappear and they'll become a valuable part of the spectrum of options available to physicians and surgeons.
Thanks for your comments. Beth, I agree, the open source development platform is exciting. naperlou, I don't know what tools human surgeons use and don't want to. You're right, this is a bit scary looking.
This is an interesting looking device for something that is going to cut you. I saw an ad this morning for prostate cancer, and there was a picture of a robotic surgeon (a da Vinci, I think). It is all a bit intimidating. I guess that some surgeons can be as well.
It is interesting to see open source applied in this realm, though. The vision system and its interaction with the actuators must be interesting. This would make it easier to develop specific lighting and processing applications.
If this effort follows other open source trajectories, there should be some significant progress around future surgical robotics developments. Giving research organizations a standard platform to build upon and fostering a more open exchange of ideas and design sharing can only serve to unearth far more compelling procedures and applications for the robotics systems.
Truchard will be presented the award at the 2014 Golden Mousetrap Awards ceremony during the co-located events Pacific Design & Manufacturing, MD&M West, WestPack, PLASTEC West, Electronics West, ATX West, and AeroCon.
In a bid to boost the viability of lithium-based electric car batteries, a team at Lawrence Berkeley National Laboratory has developed a chemistry that could possibly double an EV’s driving range while cutting its battery cost in half.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This discussion will examine what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.