Chas makes a great point re aircraft being design largely for efficiency rather than looks. It'd be interesting to see what would happen if Ford and GM did concept cars stemming from a similar engineering imperative. There is actually something like this in the racing world. I couldn't find it on Google, but I recall at the car shows around five years ago, they were exhibiting a standardized chassis with roll cage etc, into which anyone could pop their own engine and drive train.
Autos are getting a little more interesting now. For years, most changes were in the looks - I call it the "added art".
Compare auto design with manufacturing machines and aircraft. Added art is almost none existent in the latter. The beauty is in the funtionality with minimum fuss and maximum efficiency.
Like I say, cars are getting interesting again - not just adding a useless fin or egging out a headlight to look like some action hero's weapon.
That makes sense, Chuck. I wonder if that will change as we now seem to be entering a period of healthy automaker profits. Or, it could be that cost-cutting measures will become a fixed position. Of course, that could change if one company broke out with something new and was rewarded with increased sales.
Frankly, chuck, I think Detroit would have done well to produce some of their previous, wilder concept cars. They got a little too stodgy.
As for hybrids, I find it somewhat less than exciting.There are shops that will install a hybrid drive train in an existing car.It is pricey, but if you have the money and desire, it can be done.So, while it is an interesting design challenge, it is not "exciting" technology.The trick is to make them efficient and inexpensive.That is where they will have an impact.For cars, the trick is to come out, continuously, with incremental improvements.A 10% improvement in effeciency across the board is a huge thing.In the US, I think about 15M to 20M cars are sold each year.If I have my figures right, that is on the order of 10% of the vehicle fleet.So, each 10% increase in effeciency is 1% overall.While there is some room for small cars like the Smart Car, the appeal there is limited.It is cute, though.I drove one once at Beaulieu, in the UK.It was fun, but I was not convinced (my car back then was an Alfa Romeo).
Rob: I believe the issue with concept cars today is lack of money. Designers are being pushed to create concept cars that hint, maybe not so subtly, at upcoming production vehicles. The era of wildness, when designers could really let it out, is mostly back in the rear-view mirror. Honda's Accord concepts, for example, will actually be coming out later this year as production vehicles.
Nice slide show, Chuck. I was struck by a couple new designs -- the Chrysler 700 C is certainly a new look for the minivan, and the Volkswagon Bug Roadster is also an interesting look. But I agree with Alex, much of the advances are under the hood.
What struck me most about this crop of concept cars is the generally conservative approach to design. My take is that when tech isn't advancing (like say 20 years ago), the designers really go to town on external body shell. These days, the progress is under the hood, in the power train etc. So perhaps that's why these concept cars look so much more like real production cars -- and in fact some of the will be soon; at least one in 2013.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
