In the (Zenth Studios) reproduction instance you get all of the performer's nuances except for actually watching the performer who is long dead. And the reason for reproducing the performance on a real instrument, voiced to sound like the correct period instrument is to hear as close a reproduction to the original performance as possible. Nothing is more high fidelity than hearing an instrument with your own ears! Second best is a modern hi definition digital audio recording of that re-created performance. While you can listen for technique, timing, interpretation, you can also hear a lot more nuanced tonality and sound from a modern recording than an old scratchy acitate of low bandwidth and poor frequency stability, wow and flutter.
This type of performance restoration and instrument automation is a new era for the long sought after technology of capturing the moment for posterity. The Kodak moment! And it does work even if you doubt it.
Of course, short of being there you cannot recreate being in the live audience. But that too will happen someday as we learn to store infinitely more data and read it out at faster and faster rates with dirt cheap digital processors.
Yes, the performance is frozen in time and will not vary as it would if you attended multiple concerts of the same program. That's not the point. They're not trying to eliminate the human artist, at least not yet!
I would guess the technology used on the guitar shows off the company's technology. It certainly is a cool gadget. We attendees allowed to play it? Did you get a chance to play it?
bdcst, I don't think we're comparing apples to apples here. Why would I listen to an automated piano playing Gershwin (derived from an actual Gershwin performance) when I could just listen to the recording myself? Also, the Gershwin recording is ONE example of a performance by Gershwin of that piece of music. Do you think he played it exactly the same for every performance? Were other performances different? Better? Worse?
That is my point.The reason for recording music is to capture a single performance. If this is what the automated equipment is doing, it is no different than listening to a vinyl record, CD, tape, or mp3 file.
The nuance, expression, attitude, emotion and soul of the musician is what makes it special. You get none of that with a machine.
I see a human versus machine guitar "shredding" contest here. Just like the battle between Garry Kasparov and IBM's Deep Blue, how about pitting this contraption against some of the guitar greats and see what happens over the next few years as technology works on catching up....
Well, bronorb, its time for your humble opinion to change. Mechanized instruments can and do sound amazing when the engineering is done right. Check out Zenph Studios. These folks have developed a technology via DSP analysis of older audio performances of piano recitals that are turned into control files for reproducing the original physical performance and playing it back on a piano as though the dead performer was there!
IMHO, there is NO serious implementation of this other than a trade show curiosity. Mechanized instruments will always sound mechanical no matter how quiet you make the machinery.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
