In the (Zenth Studios) reproduction instance you get all of the performer's nuances except for actually watching the performer who is long dead. And the reason for reproducing the performance on a real instrument, voiced to sound like the correct period instrument is to hear as close a reproduction to the original performance as possible. Nothing is more high fidelity than hearing an instrument with your own ears! Second best is a modern hi definition digital audio recording of that re-created performance. While you can listen for technique, timing, interpretation, you can also hear a lot more nuanced tonality and sound from a modern recording than an old scratchy acitate of low bandwidth and poor frequency stability, wow and flutter.
This type of performance restoration and instrument automation is a new era for the long sought after technology of capturing the moment for posterity. The Kodak moment! And it does work even if you doubt it.
Of course, short of being there you cannot recreate being in the live audience. But that too will happen someday as we learn to store infinitely more data and read it out at faster and faster rates with dirt cheap digital processors.
Yes, the performance is frozen in time and will not vary as it would if you attended multiple concerts of the same program. That's not the point. They're not trying to eliminate the human artist, at least not yet!
I would guess the technology used on the guitar shows off the company's technology. It certainly is a cool gadget. We attendees allowed to play it? Did you get a chance to play it?
bdcst, I don't think we're comparing apples to apples here. Why would I listen to an automated piano playing Gershwin (derived from an actual Gershwin performance) when I could just listen to the recording myself? Also, the Gershwin recording is ONE example of a performance by Gershwin of that piece of music. Do you think he played it exactly the same for every performance? Were other performances different? Better? Worse?
That is my point.The reason for recording music is to capture a single performance. If this is what the automated equipment is doing, it is no different than listening to a vinyl record, CD, tape, or mp3 file.
The nuance, expression, attitude, emotion and soul of the musician is what makes it special. You get none of that with a machine.
I see a human versus machine guitar "shredding" contest here. Just like the battle between Garry Kasparov and IBM's Deep Blue, how about pitting this contraption against some of the guitar greats and see what happens over the next few years as technology works on catching up....
Well, bronorb, its time for your humble opinion to change. Mechanized instruments can and do sound amazing when the engineering is done right. Check out Zenph Studios. These folks have developed a technology via DSP analysis of older audio performances of piano recitals that are turned into control files for reproducing the original physical performance and playing it back on a piano as though the dead performer was there!
IMHO, there is NO serious implementation of this other than a trade show curiosity. Mechanized instruments will always sound mechanical no matter how quiet you make the machinery.
As energy efficiency becomes more and more a concern for makers of electronics devices, researchers are coming up with new ways to harvest energy from sound vibration, footsteps, and even electromagnetic fields in the air.
The government wants to study your brain, and DARPA wants to use similar information to give robots true autonomy beyond any artificial intelligence developed to date. Sound like science fiction? It's not.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
