Keep in mind, flush-mounting will reduce a capacitive sensors range somewhat. So, if you are having trouble with this, or would just like more range and you are not forced to flush-mount them, leave it sticking out a bit.
Danlafleur: Thanks. Last ckt I made used SS relays from Mouser that switched 120 VAC with a 6 ma DC trigger. Much better than having to build a relay chain to get to the output requirement. I will need something in the future for an automotive application that can directly control glow plugs. So the output would be hundreds of amps DC at 10-13 V.
$900 seems like a lot of money, until that's what you need to solve a problem. I remember inertial navigation units in a sealed platform with real gyros, acellerometers ans lots of precision mechanical parts.
My confusion may come from looking at the time diagram, where a pulse that is initially 90 degres ahead of the reference pulse, may miss the clock and the pulse that is 270 degres may be taken as behind the reference pulse.
On pp #13 sine and cosine both have the same values...
Resolvers have quadrature outputs. You also need to look at the colors. For a resolver position of 0, the sine output is zero and the cosine output is full scale. At 45 degrees, they are equal at 0.707* full scale.
Aren't the phases measured separately as process outputs?
The two sensors look at the same encoding disk. They are set during manufacture so that the phase is approximately 90 degrees apart (electrically). Mechanically, they can be anywhere around the circumference of the disk. They just need to be spaced so that when one sensor transisitions, the other sensor is in the middle of bar.
Alex, could you use a softer voice when you chime in? My volume is at mx so I can hear Randy. When you join in my pods are blown off and then I can't hear Randy because my ears are filled with blood. Thanks
The streaming audio player will appear on this web page when the show starts at 2pm eastern today. Note however that some companies block live audio streams. If when the show starts you don't hear any audio, try refreshing your browser.
The first Tacoma Narrows Bridge was a Washington State suspension bridge that opened in 1940 and spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7, just four months after it opened.
Noting that we now live in an era of “confusion and ill-conceived stuff,” Ammunition design studio founder Robert Brunner, speaking at Gigaom Roadmap, said that by adding connectivity to everything and its mother, we aren't necessarily doing ourselves any favors, with many ‘things’ just fine in their unconnected state.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.