Have a look through all those Pics where you can see the floor!!
Polished wood or tile that looks if the desk was staged there for the photo! The one even has a bed and duvet!
Hey guys, don't you have stuff standing around, behind, underneath your desks? If you have the luxury of "free space" you are probably busy with one(your first) measly project!!
I am sure if you drop a surface amount component (a diode say) you will bend down and be able to pick it up immediately!
I have to resort to the stocking in the inlet of the vacuum cleaner pipe to attempt to find the dropped component!
I noted that slide 4 of 13 shows a Jacobs Ladder with a safety screen around it and if grounded acts as a Faraday Cage for sub-GigHz frequencies, yet the caption states: "The last in the Nicolas Lee messy desk tetralogy is his three-foot-high Jacob's ladder, otherwise known as a Faraday Cage."
Sorry, no cigar here. A Faraday Cage prevents RF from entering, or exiting, a given space and is not another name for a Jocobs Ladder. A Jacobs Ladder radiates a pretty wide swath of the spectrum and should perhaps have a Faraday cage surrounding it to prevent interferrence with other equipment. The voltages present can make a person assume room temperature in short order, so another good idea is to keep fingers out of it. Think bug-zapper here.
My first job out of college, the sales lady used to give me grief for a messy desk. Her office was always spotless. She wouldn't even leave a pen out at the end of the day, and often I would walk by her office and for a brief second wonder if she had been let go. But then I would remember that she was a neat-freak.
I tried to ignore her harassment of my messy desk and one day I got justice. Turns out, she had put something away one day, something very important and forgot about it. It was a request for proposal for a $50 million dollar contract. Well guess what, we didn't get that one and she got in BIG trouble.
Had she left it out on her desk, chances are that we may have got a legitimate bid in on time and had a crack at the job.
I think that generation is gone, Bobjengr. That was a certain culture, and that culture has passed. Perhaps for the good. Many of the tools and books left on the desk represent the most efficient way of handling materials. The time spent putting everything away at night and taking it back out in the morning is not productive time. It's time that is spent just for appearance sake.
Bobjengr, Based on the engineering desktops I have seen over the years, I would say your work environment was definitely in the minority. But a good idea. I would say most of us fit somewhere between the two extremes.
Hello apresher. Years ago when I was working my way through the university, I worked part time for an archetict. He was German by birth and received most of his formal education in that country. His family moved to the United States in the mid-50s where he attended Georgia Tech in Atlanta. At the end of my very first working day, I wrapped things up about 6:00 P.M. I left my drawing tools on the board, including books and other reference material needed for completion of a piping layout I had started. Prior to leaving, my employer indicated to me that in this office we put away our materials and leave the office as we found it when we entered. Desk Cleared. Books filed. Drawing board in the fully horizontal position. Even the telephone sitting on my desk was put into a special drawer crafted just for the that purpose. I looked around the office to find all of the other draftsmen had done likewise prior to leaving for the day. I wish I had a picture of this office to show you. This was his only idiosyncrasy (thankfully) but we all adhered to his desire for a very very clean office.
can never experience the euphoria of finding something you thought was irretrievably lost!
Can see all these photos are of relatively "new" engineers offices.
Clear desk space and or floor (polished mind you!) is visible in most of them. My study/garage is 35 years old and untouched by any human hand apart mine own!
I don't know, Tim. From my own vast experience, I think that more papers on the desk signifies more unfinished projects, probably due to management-caused fire drills, half of which are meaningless or irrelevant.
The first job for every intern is to clean up the lab. The best EE I ever had was also the messiest. When he took a day of vacation I had the intern clean the lab. When Summer was over and the intern left it took about a week to get the lab back to the same old mess.
As energy efficiency becomes more and more a concern for makers of electronics devices, researchers are coming up with new ways to harvest energy from sound vibration, footsteps, and even electromagnetic fields in the air.
The government wants to study your brain, and DARPA wants to use similar information to give robots true autonomy beyond any artificial intelligence developed to date. Sound like science fiction? It's not.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
8 
