You did "this"? Your compalint is that they present no data? You believe?
Have you ever tried to look anything up? Have you ever went to your local library and delved into the scientific journals kept there? Have you ever contacted a researcher for their source data? If you're dissatisfied with their data, have you ever tried to perform your own research?
I have to thank you for presenting a great example of the average denier. I don't know where you get your information but science is all about participating, and it is obvious that you have no such inclination. If you did, you would have done something more than listening to right-wing talking heads and reading right-wing blogs.
Stop being lazy and do some work. You claim to be an engineer yet have chosen to be spoon-fed denier talking points and have chosen to not do your own work, including understanding how climatologists have looked at the implications of solar activity on climate. So, how can you engage in a meanful discussion?
What I am saying, is that the sun is the primary heat source for our solar system and planet. There is evidence from other planets in our solar system that the earth's warming/cooling trends are not unique. The arbitrary decision to not consider the sun to a greater degree appears to be a suspect choice of "climatologists".
Indeed all the forcings are taken into account and the solar component, which is insignificant anyway, has been diminishing for some time.
However, less well publicised are the indirect and direct influence of aerosols mainly from poorly regulated coal burning sources which reflects sunlight and cancels a lot of the warming out. Reduce this to improve air quality in China for example, and the forcing gets even higher! This is our dilemma.
I did about 10 years ago and the temp data correlated nicely with the measured solar activity. This was, of course, from an astronomy perspective with objective data and data collectors at a limited number of sites.
My primary complaint with the whole "consesus" crowd is that they present NO DATA, just their analysis. I don't take any analysis at face value without the raw data available to back it up.
I also beleieve that their analysis is based on flawed or skewed understanding of basic physics principles. There is always room for discussion over the applicability of one principle over another, but the AGW crowd demands that we all bow at their alter instead of addressing valid complaints with their methods.
"I consider this completely valid." Environmental Committe President, International Council of Scientific Unions
"An astonishing service for humanity." Professor of Environmental Studies, University of California
"We have absolutely no time to lose." Director of Science and Technology, State of Massachusetts
This is what it says on the back cover of my copy of the dvd, "Stopping the Coming Ice Age" from 1988 -- endorsed by science (Buckminster Fuller), Hollywood (Dennis Weaver) and the music industry (Sting).
You really need to read the scientific literature. Climatologists take solar radiation into account as it's the reason that the earth is warm enough for life as we know it, with a little internal warmth, like that around deep sea vents, for good measure.
What climatologists discuss with regards to the sun is solar variance correlated with temperature. What is seen when one looks at solar activity is that there is essentially no correlation between the rise seen in earth's termperature and solar activity. In other words, the increase we've seen cannot be explained by the sun.
Again, read what the climatologists have written rather than what the mass media, including right-wing outlets, presents.
Taking the macro thermal model approach, I agree that solar effects are probably the principle source of earth's temperature fluxuations. Like you, I would like to have your question answered.
I am an EE and thermal is not my thing. It sounds like you have put some thought into this so I would like to run this by you - Considering the "greenhouse" effect: In a closed system where heat is input but not radiated away, wouldn't one expect that average day and night temperatures would begin to converge as the insulating material became more effective?It seems to me that if CO2 is as effective a GHG as many assert, as the level rises, the earth's average temperature would rise but also begin to normalize to a standard temp.
The sea level is a hard thermometer to ignore, a global metric. As the earth warms, the coast moves inland and landmass above sea level decreases. Given a significant part of the human population lives in coastal areas, it will be an easy sell for them and those impacted by their migration.
As for fossile fuels, I grew up in Oklahoma and there aren't a whole lot of new oil wells being drilled there. Fossile fuels are a finite resource and they are being burned up which drives up costs.
As for our family, we have two Prius to minimize our energy costs as fossile fuel prices rise. The Prius also provide emergency power during severe weather outages. For example, there were a string of tornados last April that sliced up the TVA transmission lines. We had 1 kW of Prius electrical power for over four days for lights, TV, and living.
Fuel efficienct transportation and local power generation are a sensible precaution when heading into high-priced fuel and severe storms. So in 1999, we moved from an area about 50-200 ft above sea level, Washington DC, to an area 600-1,000 ft. . . . Just one less thing to worry about.
What global warming industry? Is this like the evolution industry, or the inflation industries?
There is no global warming "industry", only scientists doing their jobs as scientists. Manipulated data? You've got to be kidding. When scientists published papers based on manipulated data, it is eventually uncovered by other scientists. Vested GW interests in acedamia? And what are these? If there is a "vested" interest and the science is good, then there isn't a problem. However, if that interest is wrong, then it will eventually be exposed as fraud, by other scientists.
I'm afraid that rather than science, you are paying all your attention to mass media for your information. But here's what I'd like you to do, post EVIDENCE to support your allegations!
Is this all the skeptics got? Allegations of skewed and incomplete evidence with nothing to back those allegations up! This IS the problem with America and it's alive and well in the engineering community. Anti-intellectualism is the last refuge of true believers.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
