I think the airlines' issue with your suggestion, Russell, is that if I'm reading it right, your design would be loose. Yes, it's connected to both armrests when the passenger wants it to be, but if the passenger is putting it back, or doesnt' secure it properly, or whatever, it becomes the airlines responsibility if it goes flying in turbulance.
The lowly fold-out tray table is a pretty amazing piece of design. Besides the basic function, there's numerous secondary requirements. It must be lightweight, strong, and meet flammability requirements. It has to support a certain amount of weight but break away if someone hits it hard without leaving sharp pieces and remain able to be stowed after being broken. It can't have any pinch or "guillotine" hazards and can't fly out of the bin in a 15g foward-aft impact.
Why not just make the tray from a sturdy piece of corrugated cardbord coated with plastic. Advertise a ski resort on one side and a Maui hotel on the other. Clipped securely to BOTH armrests it would hold more weight than a cantilevered tray, weigh about an ounce, cost 97 cents, and stow in a pocket on the seatback in front of you. A tray with no hinge is harder to break, but if somebody breaks it anyway, the airline gets to sell more advertising.
That's a great song, TJ. He really nailed a lot of truths in the song. I saw him a couple of years ago at a festival. He still does "Alice's Restaurant." I guess he's stuck with it. I saw him sing it a couple times in the 1970s. That was understandable. But I was surprised he was still singing it 40 years later.
I have come across those tables that pop up from between the seats and have never had any problems with them. Probably being an experienced engineer helps a bit there. I have been on lots of flights where I had to hold my drink so that the bumps would not launch it into my lap, or somebody else's lap. I agree that the ones that fold out of the back of a seat are much nicer, although I have never been able to use a computer on a plane.
If you want a real challenge though, try to utilize the footrest on one of the Amtrack trains. There is a button on the armrest to release it, but in the trains that I have ridden there is nothing to make it move once it is released. The only way we figured out to use the footrest is to grab it with a hand and pull it into position. My guess is that the springs were removed to prevent terrorists from somehow utilizing the footrests for something, or possibly to prevent idiots from doing something really stupid with them.
I really would preferr that our legal system stop rewarding idiots and fools for injuring themselves, and instead, fine them for being so stupid. OF course, then we would have the lawyers seeking customers under some other premise, and that might be worse.
Airplane tables are useful... as mouse pads. I had access to a bunch of old trays being thrown out. For black or featureless tables they make very nice mouse pads! No bending or warping. Conversation piece too.
As for use on aircraft, they do leave a lot to be desired. However, there is little choice. Make a great table and someone will lean on it and bend it. Make it stronger? Not only heavier but more tempting to lean on. Live with it - and carry a pop can tab.
One thing I don't think the airlines or designers really considered is the lifetime of the product in this case. Is it reasonable to expect something that gets as much use as a tray table to last the lifetime of the plane. Those are typically flown for many years. They should have designed them to easily replaced (say during a layover) and refurbished in the shop.
I've had another rude awakening this week: no matter how hard I try, how intelligent I may be; there is always one idiot "smarter" than me who will discover the way to damage the machine. This week, the idiots won.
Arlo Guthrie has a thing or two to teach engineers about "reasonably expected misuse", from his song Alice's Restaurant:
"Kid, I'm going to put you in the cell, I want your
wallet and your belt." And I said, "Obie, I can understand you wanting my
wallet so I don't have any money to spend in the cell, but what do you
want my belt for?" And he said, "Kid, we don't want any hangings." I
said, "Obie, did you think I was going to hang myself for littering?"
Obie said he was making sure, and friends Obie was, cause he took out the
toilet seat so I couldn't hit myself over the head and drown, and he took
out the toilet paper so I couldn't bend the bars roll out the - roll the
toilet paper out the window, slide down the roll and have an escape.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
