Even though I'd been reading science fiction since the early 60s at the time I first heard about composites/hybrids, I tended to avoid the hardware-oriented stuff. So if it was mentioned anywhere before the mid-80s, it had passed me by. Interesting to hear from someone who was there at the beginning.
The UARS satelite was designed and build in the 80's. At what was then GE Aerospace, there was a lot of research going on. The spacecraft plant actually made their own composites from raw materials. So, to some extent to call it science fiction is not really far off. It was pretty close.
naperlou, when I answered I was thinking of mil/erospace apps back in the mid-80s, which is when I first heard of the concept of a hybrid that combined plastic and metal in some way. I remember my first response being "Huh? How is that possible?" It sounded like science fiction at the time.
Ann, this is just a guess, but I expect you are correct. When I worked on spacecraft, the carbon fiber tubes were attached to metal components at the junctions. The UARS satelite (the one that just fell to earth recently) was like that.
Actually, this looks a lot like a Lotus 7. If you are not familiar witht that car, it was (is?) a kit car. They are lots of fun to drive and to build. They certianly an acquired taste, thogh.
As for the safety aspect, the Lotus 7 was open with minimal doors. This is much like pre-war (WWII) cars. That is one of the reasons it was a kit car. To pass safety tests that are now required would require much more structure.
Jim, I assumed it meant a hybrid of carbon fiber and steel, but I'm not the author, nor do I read Dutch so I can't look for the manufacturer's specs. Beth, do you know what this means?
@Ann- ....not just carbon fiber, but specifically it said "hybrid carbon-fiber tubular-steel" which I don't clearly understand but would like to.Do you know-? To me, Carbon-Fiber meant polymers while Tubular-Steel meant metal extrusions.A quick Google check did not yield much clarity; I found only one reference from the Oil & Gas Journal (Petroleum Engineering) using the same term applied to drilling apparatus, but no real explanation as what the material actually is.I'd like to know more.
Gordon pointed out to me that when he designed the cover over the transmission in the front of the Cord that it was form following function.
I see that you have a picture of the Volt in there which I consider to be completely appropriate. In my article in altenergy.com you will see how much I like it.
When I first met Gordon I had offered to do an art show of his designs and I asked him if it was OK to call it Automotive Architecture and he responded , "Yes, exactly!" and went on to tell me about being a young designer with Duesenberg and was out in San Francisco and saw a book in a window and he was fascinated by it and went in, looked at it and mentioned that it was absolutely inspiring. He commented that he designed the 20 Grand after that and he even wrote to the architect complimenting him and received a reply. He confided in me that he thought that the architect was a marvelous writer but he went to see one of his buildings in France and thought that it was terrible.
I immediately told him that the book was "Vers un Architecture"
I told him that some people might disagree since he was considered to be one of the 3 greatest architects of the 20thC.
But we had a great show and a great time.
Several years ago I was invited by his Daughter and Grandson down to the ACD museum for the unveiling of the Gordon Buehrig Gallery and got to see the the letter that Frank Lloyd wright had sent with accolades to E.L.Cord. Batting 2 0ut of 3 gives him a .666 batting aveage.
Gordon went on to talk about the 20 grand which now resides in the Nethercutt museum in California. Gordon mentioned to me that he used to love to go back into the paint shop and mix colors. He said that the 20G was the first car to have a darkened aluminum/silver paint job so I have strong suspicions that they have not correctly restored that vehicle.
Gordon was a joy to know, has a wonderful Daughter and Grandson in NY.
Architect I raise my glass to both this and your preceeding comment. I, personally, find use of Retro Design regressive, especially this one. I have attached links to yester years Cords and Auburns in support of this my point. Both car makers contributed to the Pure AND Tecnnical advancement of Automotive Design and Engineering advances.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
