HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Page 1/2  >  >>
Beth Stackpole
User Rank
Blogger
Intelligent everything
Beth Stackpole   1/26/2012 7:03:59 AM
NO RATINGS
Very cool piece of development and one that would certainly benefit broader use of composites. The idea that a coating could deliver intelligent inspection capabilities is in some ways out there, but then again, in keeping with steady pace of technological advances. In many ways, the development strategy makes perfect sense. Do you have a sense of how difficult or how unique it is to develop a single coating with different signatures that can appear  different depending on different energy levels of impact?

williamlweaver
User Rank
Platinum
Onboard Coatings
williamlweaver   1/26/2012 9:14:08 AM
NO RATINGS
Thanks for the article Ann! It is great to see this technology being commercialized and incorporated into engineering materials. I was involved in the development of diagnostic coatings which, when excited and viewed under specific wavelengths, provided surface information of temperature, pressure, strain, and cracks. The coatings were applied to the surface of the completed unit for testing. I'm delighted to learn of continued development of both surface and internal coatings during component manufacturing.

One of our biggest surprises came from using composite repair material when applied to traditional metals (aircraft aluminium). Our coatings were used to inspect the performance of a "composite Band-Aid" that could be used to field dress a fatigue crack until the panel could be replaced. The difficulty was that the mechanical performance of the composite material was so superior to the original alloy that the repair site was often a greater point of additional fatigue cracking in the original metal because of the sharp differences between the materials. I imagine things will be better and far superior when all of the components are made out of advanced composites in the first place. 


Dave Palmer
User Rank
Platinum
A no-brainer?
Dave Palmer   1/26/2012 10:58:48 AM
NO RATINGS
Coatings such as Stresscoat have been used in experimental stress analysis for decades.  It seems like a no-brainer to use something like this for structural health monitoring.  Of course, it's easy to say that something is a no-brainer after someone else has already come up with it.  I'm just surprised that nobody came up with something like this sooner.

Ann R. Thryft
User Rank
Blogger
Re: Intelligent everything
Ann R. Thryft   1/26/2012 12:20:45 PM
NO RATINGS

Beth, I understand that designing these different coatings is equally simple, whether one coating detects one energy level or multiple energy levels. Creating the actual coating may be a different story, but that wasn't entirely clear. In any case, GKN said it plans to sell the coatings as an integral part of its composite aircraft structural components, not as a separate product line.


Ann R. Thryft
User Rank
Blogger
Re: A no-brainer?
Ann R. Thryft   1/26/2012 12:22:07 PM
NO RATINGS

Thanks, William and Dave, for sharing your experience in this area. It surprises me that using composites as a repair material for aluminum didn't strike anyone as not a good idea, since their properties are so different. To my limited knowledge so far, repair materials for composites are supposed to pretty closely match the material they are replacing.

The whole subject of using coatings to monitor structural health does seem obvious, doesn't it? I notice that Stresscoat does not appear to address composites. The big deal about them is the fact that damage can be invisible, hence the attempts to make it visible under other wavelengths. And yes, you would think that research such as GKN's would have already occurred, and perhaps it has. Theirs was not easy to find, so it's possible there's other such research going on quietly.


Beth Stackpole
User Rank
Blogger
Re: A no-brainer?
Beth Stackpole   1/26/2012 12:54:31 PM
NO RATINGS
Dave, You just articulated the point that I was trying to make so much better than I did. It does seem like a no-brainer, especially if the technology has been around for a while. I'm wondering what hurdles there were preventing this from being put to use in any significant form prior to now. Or maybe it's that there wasn't a formal market for something like this given that composite materials are just now becoming so dominant in aerospace design.

Ann R. Thryft
User Rank
Blogger
Re: A no-brainer?
Ann R. Thryft   1/26/2012 3:26:17 PM
NO RATINGS

I don't think the technology has been around for awhile, at least not for composites. The idea may have been. But there's a big difference between realizing one can use coatings to assist in detecting damage--the no-brainer aspect--on one hand, and on the other figuring out exactly what coatings, how they should work, how to apply them without causing other problems, etc. Since GKN is a supplier of composite airstructures and since their scientist describes redesigning a coating at the microsphere level, I would suspect that what's taken some time is the process of figuring  out details of how to make and implement such a coating. Even at this point before the 18 months + another 18-24 months before commercialization, they gave a quite coherent description of the basic idea. Yet it will likely take 3+ years before a flight test is likely. So the R&D involved is not trivial.


Alexander Wolfe
User Rank
Blogger
Re: Onboard Coatings
Alexander Wolfe   1/26/2012 3:40:47 PM
NO RATINGS
This is indeed a significant development because it holds the promise that there will be a cost-effective, easily implementable, repeatable, industry wide technique for inspect composites. This is going to be critical important not only to prevent in-flight failures, but also to gather life (MTBF) data on how different composite structures actually perform on commercial aircraft, particularly on primary structures like wings. (A primary structure in aerospace terms refers to a part where, if it fails, the plane will no longer be flyable. So for example you can survive a rip in the fuselage, but not the loss of a wing.)

Ann R. Thryft
User Rank
Blogger
Re: Onboard Coatings
Ann R. Thryft   1/26/2012 4:34:14 PM
NO RATINGS

Alex brings up two important points. First, since this proposed coating or class of coatings will be available only as an inherent part of a composite airframe structure sold by one company, it won't be available for other composite airframe structures sold by other manufacturers. I've already heard of one other project targeting a similar purpose but using an entirely different chemical and behavioral model. That means competition among different types that work in different ways. So actually there may not be much in the way of industry-wide techniques. 

Second, it does provide a great opportunity to gather MBTF data. Even if it's coming from airstructures using entirely different coating types, the data should be comparable about how composites break.


TJ McDermott
User Rank
Blogger
Re: Onboard Coatings
TJ McDermott   1/26/2012 5:01:04 PM
NO RATINGS
I've seen simple things like White-Out used during materials testing to detect cracks and delaminations.

The damage-detecting coatings themselves I believe have been around for a while.  The trick to which this article alludes is the non-visible wavelengths that would be used.  THAT is a good idea.  Damage-detecting coatings that the flying public can see are not confidence building.

The article carefully did not state which spectrums would be used, whether infrared or ultraviolet.  I might consider watching the wing with my IR scanner in the future....

Page 1/2  >  >>


Partner Zone
Latest Analysis
Battery maker LG Chem Power Inc. plans to offer a new cell chemistry that could serve as the foundation for an affordable electric car with a 200-mile driving range by 2017.
The amount of plastic clogging the ocean continues to grow. Some startling, not-so-good news has come out recently about the roles plastic is playing in the ocean, as well as more heartening news about efforts to collect and reuse it.
New developments in sensors span a wide range of applications in all areas of manufacturing and plant automation.
Some of our culture's most enduring robots appeared in the 80s. The Aliens series produced another evil android, and we saw light robot fare in the form of Short Circuit. Two of the great robots of all time also showed up: The Terminator and RoboCop.
Two students have created a voice-command system for our homes, based on the simple and affordable Raspberry Pi.
More:Blogs|News
Design News Webinar Series
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
5/13/2014 10:00 a.m. California / 1:00 p.m. New York / 6:00 p.m. London
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Aug 4 - 8, Introduction to Linux Device Drivers
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: August 12 - 14
Sponsored by igus
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service