Chuck, the only places I know for sure where two-armed robots are being used are automotive assembly plants and in aerospace by NASA for space simulation operations. The company says their two-armed SDA5D is being adopted in all kinds of industrial applications, from automated assembly and distribution to logistics and palletizing. A larger model is deployed in and by the National Aeronautics and Space Administrtion (NASA) for space simulation operations. I'll bet surgery might be a big app, too.
Yes, Ann, I remember that article, including the bit about software for non programmers. I'm seeing that more and more with sensors and other devices in automation. The complex programming is pre-packaged and all the control staff had to do is point and click. Maybe it's not quite that simple, but original programming is not longer a must.
The most interesting part of the application of two armed robots will undoubtedly be the programming, even moreso if they are programmed point-by-point from a pendant in the manner of one armed robots. Synchronizing the motions of two arms will add a whole additional dimension to the task. OF course, there may be programming methods available that take that into acount, which would be a valuable addition. I certainly hope that robot programming has advanced past the manual point by point path entry that I had to use, which was "a few years back". I have not seen any description of other programming methods mentioned in any detail in any Design News writeups, so I wonder what does exist currently. Are there any responses?
The most interesting part of the application of two armed robots will undoubtedly be the programming, even moreso if they are programmed point-by-point from a pendant in the manner of one armed robots. Synchronizing the motions of two arms will add a whole additional dimension to the task. OF course, there may be programming methods available that take that into acount, which would be a valuable addition. I certainly hope that robot programming has advanced past the manual point by point path entry that I had to use, which was "a few years back". I have not seen any description of other programming methods mentioned in any detail in any Design News writeups, so I wonder what does exist currently.
Good point, Chuck. It's interesting to observe that two-armed robots are in a way a mashup of industrial robots and the newer humanoid robots you explored so well in your piece, "Humanoid Robots Take Shape."
I wonder if we are starting to see more applications for two-armed robots. I know that single-armed robots can't do some simple operations, such as lifting and manipulating non-rigid objects. Is the manufacturing world starting to find applications for these two-armed units?
Thanks, Rob. For industrial use, whether it's welding or assembly, or some other function, robots have to be programmed, since their complex movements must interact with other machines in 4-D. That said, the programming itself can either be hands on code crunching, or a simpler, point and click GUI, which is one of the big changes in the ABB story I gave the link to below.
Nice slide show, Ann. I love to look at pictures of robots. As for the software, I was under the impression there are fewer and fewer instances where robots need to be programmed by hand. Maybe I'm wrong about this, but I thought more of the robots were now plug and play -- or at least as plug-and-play as possible.
In comments on an earlier robotics article, one engineer told us that programming by hand was excruciating. So the point and click interface described in that article I gave the link to definitely was an improvement. But the big problem it solved, along with the entire package, was making it easier to program smaller robots in smaller cells doing fewer, lower-volume jobs.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
