Rob, actually in regards to any micro device those numbers are not such a big deal. I learned recently that there are more transistors produced each year than letters printed (and copied, etc.). Think of that. A transistor is a much more complicated thing than a letter on a page, and yet we make more of them. WOW! The scale of these things is mind boggling. I expect that with MEMS devices we will see similar scale.
Karen, thanks for the update. Having written about MEMS a lot about 10 years ago from the semi and packaging production angle, it's really great to see them finally getting some recognition closer to the user end.
@Karen: Thanks for the pointer to the work being done at CMU's Quality of Life Technology Center. I'll buy the right into the case that the right usage of MEMs can enable personalization in an unobtrusive way, especially if it's "big mother" watching over the process. I like that!
Well, it is the CONSUMER electronics show.One of the mentalities I was taught when designing an electronic product was to consider that my mother would be using it.Removing the tech from technology so that a typical mom can adopt and easily pick up the use and application of a new gizmo is what makes them successful. --- So, not surprised that MEMS had a slow ramp of visibility over 10 years at CES.I think that was not the case in more technical trade shows.
Absolutely, MEMS will be a big part of Design News's upcoming Sensors in Design conference at the end of March. As we note at the end of the article, Karen Lightman will be a track chair, and she's been instrumental in helping us recruit great speakers and panelists for the conference. Again, it's March 28-29, 2012 in San Jose. Visit www.SensorsInDesign2012.com to learn more and to register.
@Ann thanks for your comment. Yes, CES is mainly an end-user show (though you'd never know it when you see some of the interesting things for sale there...but that's fodder for another blog). By co-exhibiting with several of our member companies, our MEMS TechZone was pretty successful and we are looking to making it even bigger and better with more demos and examples of the "MEMS inside the machine" so that the message about the impact and potential of MEMS is spread even further...But I was pretty impressed with the folks who came to our booth and knew what MEMS stood for (or darned close) and were excited to see our presence at CES. It was pretty cool and I look forward to next year!
@Alex and you forgot to mention that MEMS will be a key feature of Sensors in Design; with great speakers and content on March 28-29! I am really looking forward to it and hope to see many of you there.
@Beth thank you very much for your comment on my blog. I like to think of MEMS as helping us live in a world of "big Mother" rather than "big Brother" (okay I admit that is not my original quote, I am re-quoting Forrester Research's Julie Ask). MEMS, by the nature of its smart sensing, can help a person in his/her daily life in an unobtrusive way - I point to the Quality of Life Technology Center at Carnegie Mellon University - www.cmu.edu/qolt - which is leading the research and application of such technology. CMU's Dan Siewiorek, who spoke at MEMS Executive Congress 2010, was recently featured in an article in Medical Eletronics Design (http://www.medicalelectronicsdesign.com/article/quality-life-assurance) that speaks to how this can work and improve Quality of Life through "intelligent systems that take into account the abilities, needs, and intentions of the user."
I agree, Ann. CES tends to focus on the needs of retailers and end users rather than engineers. Even so it's fun to see what's getting presented. It may change in the future. Instead of Apple, you get Apple suppliers. This year was Microsoft's last year. It's certainly changing.
I agree, Chuck, CES has always been aimed more toward the user end of the supply chain than at design engineers. Wasn't it originally a distribution show? Anyway, I think it's funny that MEMS are only now getting the respect they deserve.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
