Thanks for that info Rob. That means it's possible--although not necessarily likely--that newer machine vision interface standards might go into the emerging economy geographies. But not necessarily the more complex ones, like GigE, which require more expertise. It's not a clear picture, anyway, from the MV standpoint.
Rob, I don't know the geographic distribution of where new machine vision installations are going in vs older installed base. What I do know, though, is that there are still a lot of older analog camera systems in Asia, especially Japan, so that's not considered an area where GigE is likely to take hold, at least for awhile.
Rob, that division sounds a lot like what I've heard about using Ethernet for machine vision networks: it's being deployed in new systems, and not so much in existing ones, because of the difficulty of re-engineering and re-configuring hardware and software, as well as training.
Good question, Chuck. I would think the difference between the 60 percent and the 40 percent of Rockwell implementations can be tracked along greenfield versus brownfield plants. Ethernet is likely going into most new plants as well as some upgrades at existing plants. But I'll bet a lot of the existing plants are not going to Ethernet with their upgrades.
Alex, thanks for the link to your article. What a fascinating trend! It makes me think of the production version of what IT has been working on for awhile, the "agile enterprise," or whatever they are calling it now, for BPM.
Yes, the plant floor is definitely following in the footsteps of mainstream enterprise business systems. The question is, how much will this trend accelerate when plants who aren't yet using Ethernet finally migrate to Ethernet-based automation systems? Rockwell Automation claims that only about 60% of the equipment they sell is Ethernet-based. What happens when the other 40% finally make that move?
Alongside this article, I'd like to recomment that readers check out my story, Top 5 Roadblocks to the Digital Factory of the Future. This is an important trend, the ability to rapidly adapt (repurpose) production lines, using graphical programming tools and networks PLCs to which software can be downloaded via network links. This is a big part of the ability to go rapidly from prototyping to production.
Rob, thanks for the overview. Looks like some pretty exciting trends and new developments to watch for. I'm especially interested in increasing simulation: it's good to see this powerful technology put to very practical uses in factories. I also liked the diagrams in the Connected Automation System and Cloud Computing in Automation slides. If a picture can say 1,000 words, a diagram can say 5,000.
What should be the perception of a product’s real-world performance with regard to the published spec sheet? While it is easy to assume that the product will operate according to spec, what variables should be considered, and is that a designer obligation or a customer responsibility? Or both?
Biomimicry has already found its way into the development of robots and new materials, with researchers studying animals and nature to come up with new innovations. Now thanks to researchers in Boston, biomimicry could even inform the future of electrical networks for next-generation displays.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.