Listeners, I just want to remind you that this DNRadio program will be available as part of our permanent archive. Thanks, all, for listening and thanks again, Keith, for your expertise.
Well, automotive is a bit unique in that it has to work in the hot Arizona sun, and a Michigan winter. It also has to tolerate high EMI/RFI when you drive past a cell tower or a radio station. So, microcontrollers that can handle harsh conditions are a must and an extended temperature range is a must. Beyond that it gets back to what you have for inputs, what you need for outputs, and how much processing power do you need. You also want to take a look at some of the peripheral components like crystals, sensors, hi power transistors, and the like. All have to handle the environment at worst case loads. So again, it depends upon what you have to do and how fast.
Thanks, Keith and Chuck. You haven't mentioned automotive. What about some of the autonomous automotive applications, like collision avoidance? What kind of MCUS do those applications need?
For long term applications, I would suggest microcontrollers with reliable supervisory functions. I would also suggest parts that have self programming capabilities for in field upgrades. Also check the endurance of the non-volitile memory. Beyond that, test it as best you can for all the expected, and unexpected, operating conditions that you can think of.
Well, I think you want a microcontroller that has reliable supervisory features such as a watch dog, power down reset, and good EMI/RFI resistance. On top of that, you also need a microcontroller that is approved for medical implantation and a company that will warent their parts for medical.
The question about implantable medical devices is interesting because so many of these devices have to operate for years without intervention. For such applications, are the MCU considerations any different?
Well, again, that depends on what your are trying to do with the system. If you are managing an analog feedback control, then bit sets and bit clears play an important role. If you are implementing filters in software, then multiply accumulate instructions are important. I don't know that you can really say that this instruction is important for mechatronics, and that one is not. It will depend upon what you are trying to do with the system.
Well, a feedback control is basically a low pass filter with the specific poles and zero necessary to stabalize the loop. DSP is how we create fast/efficient filters in software. So, if you are going to do a mechatronics control in software, I think you are going to end up with a DSP, it just makes sense. So, yes, I think DSP has a definite role in mechatronics.
Well, for simple applications it certainly has the processing power, and 8-bit tends to have more in the way of control peripherals (PWM, ADC, comparators). However, 16 bit has more processing power for software based feedback. I would say that most of the current mechatronics apps use an 8-bit, but as complexity grows, they are going to have trouble keeping up so you will probabaly see more 16 and 32 bit in future designs.
Again, the answer is "it depends". It depends on what you are trying to control and what you have for sensors. It will also depend upon how much of the system will be in software and if you want peripherals to do some of the work. Basically you have to make some tradeoffs about the design and then go looking for a microcontroller that fits.
The streaming audio player will appear on this web page when the show starts at 2pm eastern today. Note however that some companies block live audio streams.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
