An efficient way of using those plastic bottles, thus great thought of waste management. Recycling plastic is the easiest way of making our earth cleaning and free from plastic landfilling. We at Replas encouraging for the same concept of plastic recycling as we manufacturing plastic recycled products like plastic profiles, plastic deck, bollards, furniture etc.
Actually, this material is being used for heavy-duty bridges built to take heavy traffic. The Fort Bragg bridge Chuck references was made for military vehicles, such as Army tanks, and the bridge I reported on, in Scotland, is built to take heavy equipment loads. The same material is used to build railroad bridges, including ties. Pretty amazing stuff. And it looks like the materials supplier, Axion, is increasing its production capability with at least one manufacturing facility:
Thanks for the info Charles. I'm amazed that they were able to get the specs to be that good, actually. Whilel this is not necessarily a material that you would want to use for long-term, high-weight traffic, it might be a great option for lower cost pedestrian bridges in a park, for example.
Chuck, thanks for sifting through the specs and making comparisons with steel. Sounds like, at least for now, this material competes with steel on the lower-end apps in terms of strength and length. But at least it's been done at all--it's a start!
Thanks for the link, Ann. From what I can tell in the Fort Bragg bridge, the Elastic Modulus was somewhere above 350 ksi, which would be very low compared to steel. Ultimate bending strength is 2,300 psi, which again would be much lower than steel. I think steel bridges are designed for 36,000 psi in bending. My guess is that this wouldn't give you the long unsupported spans that steel would but it's very impressive nonetheless and obviously has supported some high loads in short spans.
Great product, no doubt. But unfortunately the cost to bring the finished product up to comparitive strength is market prohibitive, hence the lack of sales (per company financials).
Thanks for the offer, but as a reporter I'd like to know for public use, for the readers. I do understand if you can't reveal proprietary information, and I'm sure our readers do, too.
Thanks for the fire-retardant info. What exactly is the "totally safe component in the material that retards fire"?
Regarding the 34:1 ROI, to be honest that's one of those phrases that tends to sound like PR or marketing, at least without enough contextual info for comparisons. ROI on exactly what? Compared to what? Those are the questions I usually ask a vendor. In any case, what readers have been wanting to know, and so have I, is the relative costs of this material vs the traditional ones, and that information doesn't seem to be available. Hence my guess that the material must be relatively inexpensive by now--or at least the comparative COO with steel must be relatively low, if the Army has been willing to pay for it.
Did you listen to the Army video I gave the link for? There is a 34:1 ROI on the bridges. There is a totally safe component in the material that retards fire. There are also coatings we have developed to render the material totally fireproof.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
