I would guess the answer is once -- in the spirit of "Even a broken clock is correct twice a day." You propose half a day, so the answer would be once. Right, Kenish?
A thought problem, not a trick question: Assume two identical 12 hour clocks set accurately to the current time. One runs normally and the other backwards. In a 24 hour period, how many times will the hand positions of the two clocks exactly match? (Answer is the same whether a second hand is included or not).
Well, that's an old issue with 100% symetrical synchronous motors as they can rotate and lock to 60Hz in either direction. I believe GE Telechron clock motors had sufficent armature asymetry to put the armature at rest slightly in the clockwise magnetic aligment with the stator poles to make them always start in the correct direction. As for some 1960's vintage turntables, I believe at least one model from AR (Acoustic Reseach) used two motors, a small induction motor to accelerate the platter in the correct direction and a synchronous motor to lock it to 60Hz.
Ampex used fairly powerful hysteresis synchronous motors in their commercial audio tape recorders designed in the 1950's. They'd always start up in the correct direction. And they had two sets of windings to provide two speeds to pull tape at 7.5 or 15 inches per second. The one idiosynchracy of these motors was a cogging problem. If you switched motor speed windings while it was energized and turning, you would get temporary magnetization of the rotor such that it would cog sufficiently to be heard as tape flutter. Merely powering down the motor would void the magnetic memory and the flutter would go away. Easy to do since a spring loaded tape guide lever (tape break switch) controlled the capstan motor to stop transport motion if the tape snapped or slipped off of the take-up reel.
That's pretty good Ichien52. I would imagine with the reversed face, you could tell time fairly well even with the hands moving backwards. What it not possible to reverse the alarm trigger?
You're right, Chuck. I would imagine this family was quite disapplointed when the clock started working correctly. You're probably right that a company could profit from making backwards clocks.
I've got a cheap quartz alarm clock thats doing the same trick. I can actually get it to change direction at will by removing and inserting the battery at the time the alarm function is tripped. I don't dare take it apart to see how it got to this state, because knowing a thing or two about how these things are put together, I know it's designed to be a one-way process.
Back in 1972 at Cornell, we still had motors and electrical machinery courses. The text said cheap clock movements (no one had the ubiquitous battery operated quartz analog movements until the 80's?) used shaded pole synchronous motors - the shading was a loop of copper around one of the armatures.
I took my clock and moved the loop around the opposite armature and sure enough it ran backwards. I could not use the alarm function because of the way it engaged it would be going the wrong way. I pried the plastic face off and made a new face with the numbers labeled counterclockwise and I had that around for many years. At the time i just had drafting tools and made the face of paper, it looked a bit rough. Maybe I should make a new face now that I have CAD stuff... Have to dig the clock out, I'm sure its still somewhere around. Too bad the case is a hideous 1970's green color.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
1 
