the quartz analog clocks rely on an inexpensive quartz crystal which is probably+/-100 ppm, typically probably 20 ppm.
The AC synchronous motor clocks rely on the power company. I think most of the major AC power grids litteraly count the number of cycles in an hour and speed up or slow down slightly every hour to make the long term stability way better even than the short term stability. So that there are exactly 5,184,000 cycles in a day (60 Hz US standard).
2 stroke engines with reed valve intakes can run in either direction. One of my friends would start up model airplane engines, and they would sometimes get going the wrong way. He would throw a rag into the propeller to stop the engine so it could be restarted. So the bike engine running backwards is no mystery, if it's 2 stroke.
I assumed the DC adapter was for another appliance plugged into the same outlet as the clock.
I cannot imagine the adapter causing the grinding sound. My first thought is of a poor service connection. Plugging in the adapter caused an intermittant connect-disconnect (sparking) of the 110v service to the outlet. If you caught this motor just right, it could reverse it. You may also hear it as chatter or grinding in the clock. Not a safe condition.
I had an analog alarm clock that developed a similar tendancy to run the wrong way. What I found is that it had a synchronous motor that was equally comfortable starting and running in either direction, and it used a rachet mechanism to force it to only run in the desired direction. When the grease on the rachet mechanism thickened a bit it kept the rachet dog from engaging the wheel, and so the motor could now rotate in either direction.
There is no mystery at all why the clock ran backwards. There is a type of motor where the rotor is a permanent magnet inside an AC pole structure (like a "standard" synchronous motor). If the rotor is light enough, its vibration amplitude at 60 Hz will exceed a pole pitch. Such a synchronous motor will spontaneously start in a random direction. A ratchet mechanism forces it to reverse if it starts in the wrong direction. The drop damaged this mechanism, allowing the motor to start backwards.
You mean you don't just keep everything on GMT <vbg>? I only have about 6 or 7 "conventional" clocks (microwave, oven, coffe maker, cordless phones, ancient clock radio and an old VCR, etc.) and I just take my cellphone (the Verizon one, the AT&T Blackberry is way off) around with me.
What should be the perception of a product’s real-world performance with regard to the published spec sheet? While it is easy to assume that the product will operate according to spec, what variables should be considered, and is that a designer obligation or a customer responsibility? Or both?
Biomimicry has already found its way into the development of robots and new materials, with researchers studying animals and nature to come up with new innovations. Now thanks to researchers in Boston, biomimicry could even inform the future of electrical networks for next-generation displays.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.