MIROX, those are really good points. And I agree with philipp10, market forces caused by pressure to find more and better alternatives will make improvements in EV batteries, as well as other EV technologies.
In the EV world what promoters and battery manufacturers seem to not pay any attention to is the COST PER MILE!
It does not matter how much you bring down the battery cost, if it does not last.
The Li useful life of between 250 and 400 times, which translates to about 18 to 24 months of EV use in real life driving, before the battery deteriorates to a point that range is seriously reduced becomes a big problem few years from now.
California ZEV mandate requires OEM to Warrant the battery for 80,000 to 150,000 miles depending on the "emissions" certification.
Granted Li battery even after 600 cycles may be still "useful" but not to a person whose 100 miles range is now only 40 miles per charge.
I can see big lawsiuts over when the battery needs to be changed for FREE in the consumers vehicle.
And it is not just the cost of battery replacement, or loss of range per charge but the astronomical depreciation of "used" EV that makes Cost of Driving per mile more than a luxury.
I agree, Chuck, it's well funded R&D that seems to be behind some pretty amazing breakthroughs, at least in materials, for sustainable and alternative energy sources. I'd like to see more of what that report said. Can you post a link to it?
I too was confused by this article.The first page was about battery anodes and then jumped to fuel cell materials without an explanation.
As far as this article, the improvements we are and will see in batteries will make EV's a reality, contrary to all the naysayers out there who apparently think the world is a static place.As oil becomes harder to find, EV's will take over more applications. They will initially start with short commutes in the city and I believe in 30-50 years, most of us will be driving EV's wether we want to or not.
Ultimately, research such as this will be the way to cut battery costs. Economies of scale will only get us so far, according to a report done by an Indiana University Blue Ribbon panel in 2010. The panel said: "Additional battery R&D may achieve even greater cost reductions, perhaps more significant than the cost reductions expected through economies of scale and 'learning by doing' in the production process."
I was surprised to see how much work is being done on new/alternative materials for EV batteries, both li-ion and fuel cells. It makes sense, though. If better materials can shrink the size of batteries and/or make them last longer, that will help the whole EV acceptance process.
Unless I'm missing something, the first development in Ann's article (the germanium suboxide anodes) relates to Li-ion batteries, but the second development (the atomic layer deposition process) relates to fuel cells - NOT batteries. Batteries and fuel cells are two different things. What am I missing here? What do fuel cells have to do with making Li-ion batteries which last longer?
Glad to see there's a big R&D effort underway around materials to advance the utility of Li-ion batteries in EVs. There's been so much written about the development and use of bigger battery units as a way to up the power and increase the charge, it's refreshing to read about work done in other sectors that can advance the cause. Clearly things have to change/improve on the battery front in order for EVs to really gain traction among consumers.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
4 
