Good point Naperlou. This case of Sherlock Ohms really does require both experience and logic. Most of these entries require some combination of the two. I would imagine the experience comes through as a form of intuition, while the logic is a cool-headed effort to look at a system without assumptions.
Shouldn't need adjustment as long as the antenna (and the structure/tower/building) remain in the same place and the satellite remains at the same geosyncronous point in orbit (or for the TV reception case the transmitter tower isn't moved). A moderate to severe earthquake may ruin your day aim wise if your near the fault, perhaps also hurricanes/tropical storms, etc. if a mast gets bent a little or a clamp slips), but continental drift shouldn't be a problem in your lifetime.
Not sure how well the stationaly geosyncronous birds do long term for orbital accuracy however -- there's another hardware system question to ask & understand. The higher the gain and narrower the beam angle, the more sensitive you'd be.
This solution makes me wonder whether the antenna will have to be adjusted over the course of time. Certainly that was true of TV antennas. Is this case, a constant signal may mean there will not be variation over time. Is that correct?
This story verifies that ancient piece of wisdom that "a chain is only as strong as it's weakest link". This certainly is applicable to systems that use antennas of any kind. OF course, knowing that already a bunch of well trained people had checked the rest of the system may have helped with recognizing the clues a bit.
Looks like it falls under understanding *all* the hardware, specificly high gain antenna gain plots.
Once you know highly directional high gain antenna designs have multiple relatively high gain lobes off the axis of the main (highest) gain lobe, then the possibility of a secondary lobe being aimed at the signal source leaving the highest gain main lobe pointed somewhere else leading to excessive S/N ratio becomes an obvious possibility.
Definitely a good real world example following an introduction to antenna gain plots in future teaching situations.
You're right, Jenn. Usually the common sense solution doesn't come in until technology solutions have been exhausted. On this one however, I would think the simple solution would have been tried first, not last. Maybe that's just because I grew up having to move the antenna -- whether on the roof or on the TV -- in order to make things work -- like a decent TV picture.
Note the author said he'd erred years before with antenna pointing. He had first-hand experience with the problem, and passed it on to his student as one thing to try. I would hesitate to call this particular Sherlock Ohms straight forward, or requiring common sense.
Seems like a lot of training for such a simple solution. Sometimes the simplest solution is right in front of you. And I agree, it is great that the student was able to go and take care of the noisy channel.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is