David, you captured what I think some of us meant (at least, I did) about how the high volumes of automotive carbon composite manufacturing and repair can help move the whole industry forward, for automotive and aircraft uses alike. Of course, the specific apps are different, but many of the basic manufacturing and repair problems are similar, and some of such knowledge can be horizontally portable.
I recognize that automotive and aerospace requirements differ substantially.
That being said, as the automotive manufacturers provide a big push on carbon graphite, after intial price spikes from demand, the economy of scale should eventually bring the cost of the raw fibers down. This lower raw material cost could help it be a more financially attractive option; even if, many other applications still require thermosets.
Additionally more thermoplastic carbon graphite may find uses in more climate controlled applications such as seat or interior pieces of aircraft.
Furthermore, as more research and techniques for repair are developed, it opens the door for more maintanance friendly repair. Clearly, this is still not a well defined path . . . yet.
There is an increasing demand that vehicles are designed with end-of-life recycling as a main driver. Europe is aiming at 95% recovery (by weight) by 2015. I am not a plastics expert so how does the carbon composite fit in here? Is it a recyclable material?
Chuck, I agree, I just noted in a different article's thread that It seems everyone I'm talking to lately, whether composite makers, adhesive makers, coatings suppliers or even machine vision hardware vendors, are mentioning this as the driving force behind the trends impacting their products. And I think this time the automakers really mean it.
Please don't comment on this subject regarding aircraft and autos in the same breath. What works for cars at ground level doesn't always work for multi-passenger aircraft at 30,000 feet and above! Although thermoplastic vs themoset has advantages, the fibres being built into the matrix are the strength carriers....thermoplastics will become brittle at low temperatures and high altitudes, both circumstances that simply don't exist in the automobile use.Besides aircraft users are looking at 25 years minimum lifespan and a lot of pressurizing and depressurizing takes place over that period of time.
TJ, I couldn't agree more. The potential volumes achievable from automotive manufacturing should help catapult carbon fiber composites into the mainstream for several industries, with potential applications in aerospace, military and naval vehicles and aircraft.
Got it. It would makes sense over time for auto makers like GM to make investments or go beyond non-exclusive partnerships at some point as the use of carbon-fiber becomes more prevalent in automobiles. Better economies, I would think.
The first Tacoma Narrows Bridge was a Washington State suspension bridge that opened in 1940 and spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7, just four months after it opened.
Noting that we now live in an era of “confusion and ill-conceived stuff,” Ammunition design studio founder Robert Brunner, speaking at Gigaom Roadmap, said that by adding connectivity to everything and its mother, we aren't necessarily doing ourselves any favors, with many ‘things’ just fine in their unconnected state.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.