Many good comments by various folks! Here are my responses to a few:
Alexander: fuel cells are still ridiculously far from being a cost-effective automotive power source (using ANY fuel, but hydrogen is easiest to implement as far as fuel cells go). They are also still very low power density - so they need to be large if you want realistic horsepower. I think we will see some applications in fixed installations long before any automotive applications.
Jerry: I agree completely - while a "miracle" breakthrough battery would be nice...there are many things that can be done to reduce the energy needed to move the car and therefore make it easier to have a practical and cost-effective EV. see: http://www.edison2.com/blog/month/january-2012 These guys won the "automotive X-Prize" usign an ethanol burning engine...but now have an interesting prototype EV version. 114 mile range on 10.5 KWh's. However, I'll also point out that the low weight and drag of their design also gives awesome performance using fuel-burning engines too.
After researching all the related issues deeply, I find myself scratching my head about what problem the EV zealots think they are solving. First, modern engines are more efficient than most articles say - the Prius is ~38% efficient, and future versions will certainly acheive over 40%. That is higher efficiency than the average coal power plant, and in fact higher than the USA average grid efficiency (coal & natural gas to electricity conversion). The "elephant in the closet" is that EV's do not save energy vs. fuel burning cars (although they do shift from oil fuel to coal+natural gas).
A much more practical solution is to create a liquid synthetic fuel that will supercede gasoline, but leverage all the existing infastructure and vehicle technology. In the short-term, this could be synthesized from coal and natural gas (cut out the "middle man" of the power plants). Longer-term, solar-synthesized fuels or biofuels would create a renewable fuel that has all the conveniences of gasoline without the huge trade-offs of EV's.
Chuck, thanks so much for the link. I want to cover this topic more from the materials standpoint, since there seems to be a lot of research going on, and I want to make sure I focus on what's most useful to our readers.
Actually, lithium-ion is today's leader, which is why all the automakers are using it. Lithium-sulfur and lithium-air, two long-range contenders, are so far off that not much has been written about them yet. Here's a starting point on the challenges of Lithium-ion.
The question of money is a really important one. My feeling is that we need more battery research -- lots more. Lithium-ion has an energy density that's about 1/80th that of gasoline. We don't need to build a battery with an energy density that matches gasoline's, but it would be nice to get closer. And that isn't going to happen by tweaking lithium-ion. The only real answer that I can see is research.
Chuck, I remember GaAs. It was the material of choice for not only Cray processors but some really high-speed networking chips way back when only huge companies could afford them, and could afford the associated cost. Although it didn't win out as the material of choice, I think it helped spur forward-thinking innovation of the type you mention by showing that at least those speeds were possible, and forming a competitive alternative.
Silicon has won out over several other materials for various specialty chips, most lately active PV solar cell wafers, primarily because it's so cheap and abundant, and because it got there first in manufacturing, that chip makers have been highly motivated to make it keep working so they can keep getting ROI for their enormous fab cost outlays.
Battery materials, OTOH, appear to be so complicated and diverse that I don't think this model applies. It sounds like many different approaches need a lot of money and innovative thinking thrown at them.
Ann: Indeed, changes in materials really have historially messed things up for electronics manufacturers. Consider the great Seymour Cray: He believed he could get past all the technical difficulties associated with gallium arsenide and build supercomputers with it. If anyone could have done it, it would have been him. But he's gone (unfortunately) and silicon is still the material of choice.
That's a really good point, Ann. If we're going to make a competitive vehicle battery, we're going to need a "battery miracle," as Gates has said. And I think the only way we'll get there is to heavily fund forward-thinking battery research. This is a really sticky, difficult problem and I don't believe it will get solved without a concerted effort.
Chuck, thanks for the link to Gates' talk on Moore's "Law" (Moore himself said it was only an observation). Aside from pointing out how we have misunderstood Moore's statement, Gates also mentions briefly that batteries have "deep physical limits" to improvement, and that the problem may not be economically solvable. I just hope throwing lots of money at it in 50 different startups may result in something useful.
As a LEAF owner I am disappointed that zero analysis of the Nissan battery design was mentioned. While Tesla was critical of the LEAF battery cooling system (there isn't one) the choice of keeping a system simple by avoiding the need for cooling and hence the need for coolants not only improves the cost, it also provides an improvement in safety and reliability with a simpler system.
Engineers at Fuel Cell Energy have found a way to take advantage of a side reaction, unique to their carbonate fuel cell that has nothing to do with energy production, as a potential, cost-effective solution to capturing carbon from fossil fuel power plants.
To get to a trillion sensors in the IoT that we all look forward to, there are many challenges to commercialization that still remain, including interoperability, the lack of standards, and the issue of security, to name a few.
This is part one of an article discussing the University of Washington’s nationally ranked FSAE electric car (eCar) and combustible car (cCar). Stay tuned for part two, tomorrow, which will discuss the four unique PCBs used in both the eCar and cCars.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.