This isn't playing with Nixies. Buying Nixies, wiring tube sockets and getting a bite from the high voltage is playing with Nixies.
While interesting that this project outputs an analogue voltage which sometimes represents the correct time, not actually using the Nixie tubes directly kind of takes the fun out of it. You can use any dvm for this and that would be interesting in and of itself.
But what's the point if you don't risk getting a mild shock from playing with the circuit? And if you don't actually use nixies how are you going to learn anything?
Building a display with nixies is not a big deal, just some high volt switching transistors like a mpsa 42 or 92 tied to the output of the driver chip, whether it's a clock or voltmeter or a random number generator.
I've worked with vacuum tubes my entire life and there is a lot more fun to be had lighting them up and making them do something useful or even unnecessarily useful.
You haven't lived unless you've been bitten by 30KV off a color CRT.
Readers might be entertained by a Nixie-tube artwork I made many years ago, using 4 "giant" Nixie tubes--reputed to have come from the NY Stock Exchange when they upgraded. I attach a photo; the piece is about 4 1/2 feet tall. I programmed it to deliver 512, 4-letter words arranged into droll and mildly insulting sentences/paragraphs, all decent. It sold immediately from a gallery, to a realtor who put it in her office for the entertainment of her customers. I wish I still owned it...
My husband serendipitously mentioned nixie tubes the other day, so I couldn't resist sharing his experiences with them
His dad was a Heathkit hobbyist back in the early seventies who also made a few digital clocks, a few of them sporting these very tubes. Hie remembers his dad designing the board layout from circuits pre-designed by an engineer friend, and then etching the patterns in an acid bath in the kitchen. Soon, my husband was drafted by Dad to solder the components onto the boards. Eventually, the move was made over to LEDs for reasons of power efficiency, but he says he still missed that yellow glow.
Altair has released an update of its HyperWorks computer-aided engineering simulation suite that includes new features focusing on four key areas of product design: performance optimization, lightweight design, lead-time reduction, and new technologies.
At IMTS last week, Stratasys introduced two new multi-materials PolyJet 3D printers, plus a new UV-resistant material for its FDM production 3D printers. They can be used in making jigs and fixtures, as well as prototypes and small runs of production parts.
In a line of ultra-futuristic projects, DARPA is developing a brain microchip that will help heal the bodies and minds of soldiers. A final product is far off, but preliminary chips are already being tested.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.