I don't think it was just price that kept them out of clocks. They got pretty cheap on the surplus market back in the 70s and I built a clock with them. When left on continuously, they blacken. I think it took a couple of years: they were still lit inside but you could barely read them. All of the ones I ever saw were glorified neon lamps and had that orange-red neon color.
Your Google group for Nixie fans sound great, radio-active. We're always looking for new Gadget Freaks. Do you have any projects that might fit? Send me a note, and I'll send along the list of items we need to present a Gadget Freak.
Plus, we pay $500 to our Gadget Freaks. Feel free to spread the word.
There is a very active Google group devoted to Nixie fans. It's a bit of a cult industry, lots of geeks putting together nixie projects, complete clocks, kits for sale, etc. (I'm one of them). The tubes themselves are getting a bit pricey, at least for large ones, but are still available in pretty good quantities. The tubes were still in production in the old Soviet Union right into the 80's, maybe later.
There has been discussion of nixies spotted in movies. There were even a few pinball machines that used nixies as the score display. Lots of test equipment, other industrial applications, but interestingly, they were rarely ever used as clock displays in their heyday, as they were too expensive for consumer applications.
If you're interested at all, join the Google "neonixie" group.
Thanks, rajackson. I guess that explains the color change. Not being a Nixie fan or user, I wouldn't know the difference between the two, but now I'm curious about the appearance of such items in movies. I bet someone somewhere has made (a) list(s).
The indicators on James Bond Goldfinger are *NOT* NIXIE tubes they are a simmilar vintage display though, The displays in question are side illuminated displays that use a set of ten incandecent bulbs to light the edge of a plexiglass sheet. The digits them selves are made up of dots drilled into the sheet. For a movie with NIXIE tubes check out the display counters in PIXAR's Monster Inc.
Try being bit by a 50kV Pulse Transformer in the fifth grade haha, that's what got me really going... then two more times in the next five seconds!
I love my nixies, but for this project I didn't want to ruin the meter so I didn't re-wire the nixies themselves (yes, I know it is a must for me but I am also a college student on a ramen type budget, I have to select which equipment I ruin wisely). I'm going from the ground up with some NOS parts from Russia for that.
-Jimmy
P.S: It says James in the article because that's how I sign my name on a lot of stuff, Jimmy for conversation though.
Well, I *am* old enough to have seen Goldfinger contemporaneously--just barely. I remember that scene well, and I think it's amazing that anyone could identify the Nixies as Nixies during such a tense situation.
Old analog tech acolytes may recall the appearance of Nixie tubes in the early James Bond film "Goldfinger," where Sean Connery is handcuffed to a bomb at the end of the movie. The bomb has a Nixie tubes showing the timer counting down to detonation. Interestingly, I don't think they were red, which was the more common color, but rather white, which is why they kind of stood out at the time. (I should note that I'm not that old; I did NOT see Goldfinger contemporaneously.)
My husband serendipitously mentioned nixie tubes the other day, so I couldn't resist sharing his experiences with them
His dad was a Heathkit hobbyist back in the early seventies who also made a few digital clocks, a few of them sporting these very tubes. Hie remembers his dad designing the board layout from circuits pre-designed by an engineer friend, and then etching the patterns in an acid bath in the kitchen. Soon, my husband was drafted by Dad to solder the components onto the boards. Eventually, the move was made over to LEDs for reasons of power efficiency, but he says he still missed that yellow glow.
Thanks for posting the art, Ken. That's a fine use of the Nixie tube. Anybody else out there with cool uses of the Nixie tube? The art use seems to have worked very well.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
