It is often the case that the OEM changing process is far more complex than the one that others may use. Just like the ORielly's procedure, I have done changes based on what I could see, which usually was much less effort than the dealer procedure. So don't give up hope just yet.
I would offer that heater hoses are not a wear item and so they could reasonably be expected to take more effort to replace. But we know that a headlamp bulb will fail eventually.
Back to an early reply: IT'S ALL ABOUT THE MONEY. It COSTS the manufacturer MONEY to design and build a user-servicable vehicle and it MAKES MONEY for them to do it that way. What they are really working towards is a totally throw-away car. They don't want their stuff to be rebuilt, re-used or resold. Just take that 3-year old car to a recycle site, drop it off (maybe you'll get a few bucks for it) and head over to the new car lot. By the time the makers get to this point no one will give you anything for it as a trade-in...even they will take it to the recycler. Market manipulation: It's a beautiful thing.
I remember Ford announced in the mid-to-late 90s that owners could no longer work on their own cars, that the vehicles were too advanced and required tools (computer programs) that average owner does not possess. One would guess cars are designed now with that in mind.
But even given that, they're making it difficult for the shop as well.
I had the same experience above but before I removed the bumper i went back to O’REilly’s and asked if anyone knew how to change the headlight. One of the guys went out to my car and right above the headlight adjustment screws are two black plastic tabs. He told me to pull up on those. I had to use a screwdriver for leverage but when both tabs were pulled up the whole bulb assembly pops right out and changing the bulb was a breeze. Hope this works for you.
This is not unusual for G.M.. I had a 1978 Camaro that required the removal of the right front fender to replace a heater hose. There are many other nightmare stories out there on other models with various design glitches that make major work out of a simple task. I have found that the most common issues generally revolves around the use of a shared engine in various models. Unfortunately cars today are designed for assembly and not for service, a practice that needs to be reviewed by all manufacturers. In my humble opinion servicabilty is a very important part of car design and is currently being overlookedor just plain ignored. I remember the ad campaign from Ford for the 1970 Pinto. It was advertised as being completely owner servicable and was puposely designed that way. Dealer labor rates are approaching $100/hr and the simple task of headlight bulb replacement should not require a trip to the dealer. Maybe if the buying public screams loud enough they will listen.
What do you expect, when the auto companies and their outside contracted design companies lay off, or let go under early retirement plans, all of their experienced designers? It was bad enough before, but expect to hear even more horror stories like this, most of which are likely to be stupid oversights, not caught early enough in the design process.
It's even easier to mess up when using a computer aided design system for your design as most of these people have seldom actually worked on cars, so as long as the initial assembly sequence works, everything is fine... By the time you reach your initial physical prototype stage, it may be too late to change things, even if you're smart enough to recognize now that there may be a problem.
That's not to say that some of these "gotchas" aren't fully intentional, aimed at bringing in more service dollars for the dealers. The automaker's mandate is only to get most of the vehicles past their warranty period without major service costs. After that, any expensive repairs that can be "driven" to the dealerships just put more money in the dealership's pockets, or perhaps "encourage" the owner to buy a new vehicle "now" rather than later. Not a bad thing from their point of view, though one suspects that the next new car they buy won't be the same model, and maybe not the same brand...
I learned how to drive in my father's 1959 Cadillac Fleetwood Sixty Special sedan. Using today's dollars, he paid over $85,000 for it.
After about one year, the radio light burned out so we couldn't see what station it was on at night. During a regular oil change service, he told the Cadillac dealer to replace the radio light. They said it would be ready later that day.
When we pick up the car, the bill was $3.50 for the oil change and lube, $0.12 for the new radio lamp, and $150.00 labor for changing the bulb. They had to pull the stearing wheel, the entire dashboard, the unmount the radio chassis to get to the bulb. That's over $1,000 in today's dollars. Perhaps GM does this to keep their service people busy. You'd think that after so long they would get a clue.
You must be kidding. Any cut price auto-parts store will sell you cheap H7 halogen bulbs (I could mention brands, but I won't) that wouldn't stand 5 hours of continuous use, and barely last 6 months in normal service. Stay away the low cost! In my Peugeot, changing a bulb in the car wasn't much different that in a light fixture in the house.
That is an awfully lot of work for a headlamp bulb. However, it probably is a balance between reduced manufacturing costs (something driven heavily by the asian imports) and service life. What shocks me as you had to replace a headlamp on a 2008??? Halogen bulbs have a very long life. I have 10 year old cars that still have their original headlamp bulbs in them. Most people will never have to change a headlamp bulb, very few will every have to change one more than once. Given the life of these bulbs, this may be considered acceptable service labor. As for sparkplugs, it's not just GM (know your cars better), it's pretty much every manufacturer with a tranverse V6. V6's and front-wheel drive with today's cab-forward designs are just not a good match. But again, considering that tune-ups are now every 100,000 to 150,000 miles as opposed to the every 20,000 they used to be, this is not so unreasonable. The total time required to do these maintenance items has actually decreased, not increased. Think about it. And if you learn a few tricks and are good with a wrench, they actually aren't half as bad as they sound.
I thought my 2005 VW Beetle was bad. The whole headlight assemble slides out the front of the car after you loosen this plastic circular sliding lock ring. I'm sure the lock works great when the car is new and clean but after a few years of weather it gets dirty and gritty in there and it doesn't slide as well.
Just as described in this article, the manual says "take it to the dealer" but I read how to do it online and changed it. The second one to go coincided with some warranty work so the dealer did it for me. That bulb burned out again (it seems to burn out bulbs frequently) and I did it myself last week. However, it looks like the mechanics broke the lock ring because the little thumb handle snapped right off when I put some pressure on it. With a lot of jiggling and swearing, I got it out and replaced. Managed to get it back in but it's not in all the way and I doubt if I will ever get it out again.
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
