Dear Azny - I failed to note that I was only adding the wheel assembly/generator to the pack. Straps and all would remain for travel on non-paved trails. Not ever a grunt, I can't say how much walking is on pavement. But I'm sure 100# doesn't add much energy to the soldier. I'd hate to back-pack my luggage through an air terminal.
good thought, nice try Mex-- but no dice!!--imagine pulling a wheeled pack up a steep rocky incline of 30 degrees in Afghanastan, not only do you have the 100# pulling you backwards, your wheels will get stuck. and a squeek of the wheel on a silent mission would be deadly.
if it wasn't so serious it would be hysterical to see a platoon of troops running around like 3rd graders pulling their wheely backpacks, or airline passengers scrambling with their rollies--- gotta be a scene somewher in Stripes!!!
AW-- HumVees have chargers in them, equipment checks prior to mission deployment require the soldiers to make sure things are charged up. If during the mission the IR loses power, the good soldiers carry on ( after all, battles have been fought for hundreds of years without IR at night) the poorly trained ones sit down and cry!!-- US forces thankfully are well trained
Take heavy packs off backs. Then put wheels on them. Each axle could drive a small generator while making combat postures possible. Drop the pack handle and grab the rifle. Much simpler than untangling from two pack-straps to fight. Save energy by pulling the pack while charging cells.
@George Kaye. You are so right. Does this not sound so typically bureaucratically government? If the problem is batteries then find a way to get the troops batteries. Not some fancy doodad that is going to add wieght and effort to his job.
The article says 20 pounds of batteries, "about 1/5" of his equipment weight. That means each soldier is carrying 100 pounds. It was another war and a whole different army, but when went on an operation with rations for 3 days, our own ammo, 200 rounds for our M-60, claymore mine, flares/smoke, and a LAW my rucksack wieghed in at 70 pounds and kicked my tail. By the end of the day very few of us were in a combat ready state. I question the extra 30 pounds in this article. If there is indeed 30 more pounds today, then that should be the first order of business: get some of that weight out of there.
Get the device off the foot and put it in a kneepad that most of the soldiers wear anyway. Make it a hybrid knee "orthotic" & workmans kneepad that can be worn externally on the leg. It'll be much easier to access in situations where you can't reach all the way down to your ankle to locate a new battery.
In all of these energy harvesting schemes, consideration must be given to: The cost /benefit of a device including weight, ease of use, reliability and other factors versus the actual energy recouped. For the few watts recouped, the user (the dog-face hauling it around) has a bulky gizmo that may affect agility when climbing terrain and urban rubble, and increase the effort to walk. Remember, that harvested energy has to come from somewhere.
This deal reminds me of a project I consulted on: the client wanted to attach wind turbines to an electric automobile to recoup energy to help charge the car's batteries. A simple paper analysis showing the fallacy of his idea wouldn't do, so he bought an electric vehicle and paid me to prototype and test wind turbine generators that, as predicted, didn't cut the mustard.
Azny and Criteria Dependent, I'd like to thank you both for your experienced-based perspective. Re Azny's comment about the variety of batteries and HumVees, that's exactly what I was trying to get at in my earlier comment, though I missed the mark. What is the solution for HumVees? What do HumVee-based troops do when, say, their IR vision equipment runs down?
Agreed, As a former infantryman, I can see this unit seriously hampering forward progress. Especially walking in mountainous and rocky terrain. I agree with the previous post, a sealed unit in the sole of the boot might be a better approach.
Why such a Rub-Goldberg contraption? Put a closed loop air cushion ( piston ) in the heal of the boot to both soften the walking shock load and apply the downward walking pressure (kinetic energy) to drive the generator through hydraulic principles. All contained inside the heal of the boat for a sealed unit...
By experimenting with the photovoltaic reaction in solar cells, researchers at MIT have made a breakthrough in energy efficiency that significantly pushes the boundaries of current commercial cells on the market.
In a world that's going green, industrial operations have a problem: Their processes involve materials that are potentially toxic, flammable, corrosive, or reactive. If improperly managed, this can precipitate dangerous health and environmental consequences.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
