User Rank
Punkin Chunkin
Tim   11/7/2011 8:35:32 PM
We used to have a low key punkin chunkin contest in Raleigh, North Carolina.  There was usually a team of students from NC State there as well as a lot of local groups like Boy Scouts and church groups.  It was great to see some raw engineering at work.  The funny thing was that the college students usually used all steel construction while older groups used a lot of wood in their constructions.  Engineering and designing with wood seems to be a learned task that is not taught much in school.

William K.
User Rank
Pumkin Tossing Competition
William K.   11/7/2011 4:54:39 PM
I likewise hope thet the Wright-Patterson team did it on their own time.

In this corner of Michigan there has been a competition that seemed a bit looser in the requirements for the launching system. The very best that I am aware of was quite a bit farther than the 2000 foot mark, somthing over three thousand feet, which was obtained by means of a fairly complex compressed air system. The very most complex setup had a secondary air insertion mechanism partway down the barrel, which overcame some of the thermodynamic limitations of the more standard approach. 

My own speculation has been that some sort of mechanical launcher that used an air cylinder as the energy supply could beat a similar unit using only gravity for power. The serious problem is that compressed air can store and deliver a vast amount of energy, which in a failure mode could injure a whole lot of participants and bystanders. So while it has a tremendous potential, the compressed air approach would add enough to the safety requirements aspect to reduce the fun aspect quite a bit.

MY own, fairly safe, air launch experiments were able to deliver about a pound a distance of about 300 feet. Of course, this was from a hand-held launcher that was a lot smaller than these wonderful pumpkin launchers.

User Rank
Re: Hooray for Punkins
mechdes50   11/7/2011 12:10:49 PM
While I think the contest is more than admirable to showcase mechanical engineering ( I do love pumkin chuckin by the way).  I certainly hope that the enginerring team from Wright Patterson were doing this on their own time.  In this time of fiscal frugality one would hope that all federally subsidized programs would keep a short leash on their budgets to ensure no more waste is going on.  At least no more than usual.


Beth Stackpole
User Rank
Re: Hooray for Punkins
Beth Stackpole   11/6/2011 7:01:33 PM
Thanks for wading in, William. It does seem like a pretty cool event and one that can showcase a lot of great engineering prowess at a variety of levels. There are grade school students, university students, hobbyists, and like this team, professional engineers, all participating in the same event. And I don't think this is the only one--there are several others held around the country.

User Rank
Hooray for Punkins
williamlweaver   11/4/2011 11:28:12 PM
I haven't attended an event, but I've been following this competition for a while now. It's a great time and exposes the general public to the process of engineering and use of scientific tools to solve and optimize complex problems. Now that our public maned space program has been scrapped, it's awesome that engineering gets a chance to be put on public display in such a fun, positive light.

Partner Zone
Latest Analysis
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Check out these gifts that will make you the hero of your Secret Santa party.
Voting has closed on our 2015 Gadget Freak of the Year contest, but it is not game over yet for two competing projects.
Design News Webinar Series
11/10/2015 11:00 a.m. California / 2:00 p.m. New York
10/29/2015 11:00 a.m. California / 2:00 p.m. New York
10/20/2015 8:00 a.m. California / 11:00 a.m. New York
12/2/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 6 - 10, Building Raspberry Pi Controllers with Python
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service