A failure spread around the pilot would still allow landing. All in one arm could wind up being hard to mannage, although still possible.
It does seem that a device like this would be within the capabilities of many builders, even though no information about the motors or props is provided. The concept is quite interesting, and I can see a possibility of using an onboard engine driven generator to provide a much longer flight time, or a hybrid version for when it needs to be quite part of the time.But I do need to find out about those motors and props.
The comment about "can still safely land even if up to four of its sixteen motors should fail" is nonsense. If you look at the design studies the four arms are meant to be folding, so the most likely failures will be in the communication link or power link at the joint (or the joint itself). Failure of four motors on one arm would be catastrophic (and rapidly so).
Also in the design studies is a three arm 12 rotor design. This probably the preferred design, one would assume the fewer rotors would have longer span and therefore more aerodynamic efficiency.
It's a fun idea though, I can see myself dodging traffic in three dimensions on my morning commute :-).
This is a nifty vehicle, but it's clear why it didn't take off (pun intended). No reverse alone presents a big problem. I would imagine wind is a tad rough on passengers. I wonder how its energy consumption compares to the internal combustion engine. My guess is the helicron uses more energy per mile at an equivalent speed. It looks fairly inefficient. But maybe not.
Thiis has a very interesting video, although I would rather have not had so much bandwidth taken up by the dramatic sound track. Those are quite small motors, it appears. It was not clear what the mechanism is for controlling the flight direction, that would be interesting to see.
It looks a bit like a project that others could duplicate, which could be the start of something big. Really big indeed.
Are you able to provide additional information about the voltages and power levels, and anything else?
Great report and such an interesting subject. Very interesting design. I know there are some drones with electrical motors used in Israel, but clearly not the size and design like that with multi motors. I agree that we need to see some controlled motion, rotation and direction controll.
It's a pretty impressive achievement, but maybe not a game-changer. Hovering and station-keeping is good, but I'd want to see some evidence of direction control, turning, and straight-line movement. Can it rotate on its own vertical axis (a useful feature of ordinary helicopters)? The noise of 16 uncorrelated propellors is an interesting sound.
And those guys better stick to engineering -- the video production was pretty hilarious, particularly the uber-dramatic style of the opening, and the choice of music.
This is indeed interesting! A few more details would help, but what is there seems almost like enough for others to duplcate the thing. I can see that stability would require close control of motor speeds, and I do wonder just a bit about how to turn and steer the thing. It sort of looks a bit like the helicopter windmill written up a few weeks ago, which could be flown up to where the airflow was much higher, at which point it would serve as a generating windmill. So we do have a really interesting concept here.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
