Love this treatment. Very cool to see the juxtaposition of the jet engine created in the university setting, all buttoned up and produced (unbelievably so) with a 3D printer compared to the guy in what looks to be his basement with the 40-year plus crinkled up design plans. Either way, great stuff and a perfect way to showcase the back-room innovations happening every day.
It should also be noted that the use of small jet engines has become quite common in the model airplane field. Well, quite common in a somewhat limited sense! Model jet turbines with impressive performance are readily available although the costs are (at least to this penny pinching engineer) pretty high (somewhere in the $2,000 and up range) and there are a number of model airplanes available to house these engines.
The newer ones are incorporating an impressive amount of 'smarts' (i.e. uP controllers) for much greater ease in starting and running. The engines are also incorporating trust control including vectored thrust control (i.e. the engine's output can be slewed from the normal axis to permit some amazing variations in the aircraft's flight path).
The performance of these jet equipped models is truly impressive .... and loud!
Unbelievably stupid; When an overspeed sends 2 halves of a centrifugal compressor in opposite directions, you can get two students at once. Then, the unloaded turbine can overspeed and blow. A tour of a real test cell with pictures of the torn up concrete walls looking like machine gun pits and ripped up casings should be coming from the professors. Even the brilliant designers and builders at Pratt, Rolls or GE keep concrete or 20 pains of glass between themselves and the new product........
A couple years back when I had some downtime between jobs my friend Asim and I built a nifty jet engine using a turbocharger. The interesting part was constructing the combustion chamber. I designed it and created the CAD drawings and had a local machinist cut the metal from scraps I got at a boeing scrap yard in Kent WA. teh compbustion chamber was about 20 inches long and made of some Inconel pipe I found.
It worked well enough but it turns out to create any kind of useful thrust the engine has to move a lot of air. The turbochargers from cars and big trucks have very heavy casings to resist catastrophic failures so I was not too worried about the high speed compressor rotor coming apart.
The idea we were working on was to create a Solar powered engine to drive a PMG directly coupled to the turbine. Unfortunately I had to go back to work but it was certainly a fun project. I wish I had the pictures and the thermal analysis software I wrote for it.
I think that the term, "stupid" is a little harsh. People place way-too-much emphasis on safety to the point that it impedes R & D efforts. True, the students, and faculty need to take precautions, but if we buy-into your philosophy, we wouldn't have had a great run with the Space Shuttle. We lost two ( 2 ) crews, but while tragic to be certain, you didn't see anyone back-away from future missions, either. Life's dangerous, period, and end, and we're all going to, "buy the farm" sooner, or later. I'm not seeing a down-side to dying while doing something that you're passionate about - it sure-as-Hell beats dying while taking a dump in the Nursing Home restroom.
I think you have just perfectly illustrated Martin's point. Even with all the testing and safe practices utilized on the space program accidents still happened and lives were lost. To assume those were the only lives that would have been lost if all of the precautions had not been attended to is just plain wrongheaded. Why do you think the missions were suspended after each of those tragdies? Studies were conducted and changes made so those would be one time occurances.
As for as your "We are all going to buy the farm" attitude: I hope you have the decency to tell all of your coworkers of your feelings before you engage them in any activity that could be hazardous. If you continue to work in that manner, you will not have to worry about that nursing home. My hope is that you do not take anyone along with you. Stupid may be a harsh word, but it will do until a better one comes along.
I don't endanger lives, nor do I think that safety is something that should not be taken seriously. My co-workers' safety always supersedes mine.At the same time, the Shuttle missions suspended notwithstanding, it's obvious that you would have ended the Shuttle program, based upon your response. Attitudes, such as the one you illustrate would have resulted in all of us eating sauerkraut, had it not been for the myriad of brave people who fought for world freedom in World War-II, unless you’re naïve enough to believe that all military equipment was fully-tested to cover all safety contingencies back then.You pick up the pieces of mistakes, learn from them, and go one - you DON'T say, "boy, this is dangerous", and stop.
That's the point that I was making. It's your right to be meek; yet, it's also my right to embrace challenges.
Back in 1967 I was involved in a project with some friends who were attempting to build a pulsejet engine to drive a bicycle "a bit faster". WE did succeed in creating a device that gave us lots of heat and noise, but no worthwhile thrust. Of course, that was closely related to our not having access to any machining capabilities.
But it was quite educational. Did you know that at 500 degrees kerosene will explode just like gasoline? In addition, when it is that hot it does not require any special nozzle to create a mist in the combustion chamber.
The pity is that if we had been able to come up with a good set of reed valves the thing would have been very impressive indeed. But I can't imagine sitting in traffic right near a jet engine that was glowing a dull red. We certainly would have understood dealing with waste heat, and probably some other things as well.
Although we did have some "incidents", we never had any burns or other injuries.
Nick, The first wheel was used perhaps 3000 years ago. Major improvements only began 100 years ago. The Chinese had crude rokets 1000 years ago, but when Goddard did his pioneering work, with no gov help, he was ignored by all but the Germans. During WWII we became good at building aircraft, but few were state of the art. In 1957 I was a student at MIT & that year we got 'a kick in the arse' when we heard the 'beeps' from Sputnick I. We has a 'peaceful' satelite program, the Vangard, that was built by a naive Naval research center. The first two exploded on launch. Von Braun & his German team had tested V2's in New Mexico & were then in Huntsville developing short & medium range rockets. I know from those on the scene where Von Braun had his team 'working on the side' to develop a satelite via existing military-based launch vehicles. After the Vangard failure Von Braun said, 'I'll launch one in 30 days' - and he did. (My small company built electronics for the Saturn V and I spent a lot of time in Huntsville).
The Russians had a great exhibit of space hardware in Ft. Worth, TX in the 1980's and I was amazed at how crude some of their hardware was. Only after the breakup of the USSR did we know how many failures and losses of life that they had. And remember, that was 'the cold war'. In WW2 the atomic bomb was developed in just over 3 years. It took a team of scientists & engineers from all over the world to convince a mostly-ludite gov to proceed with a weapon that saved 1,000,000 American & Japanese lives AND held the USSR at bay until their economic collapse. (See 'The Making of the Atomic Bomb' by Richard Rhodes). Were there deaths during that development?. Yes, but the risk-result worth it? I think so.
The 'nanny state' tells us what to do. Are they qualified? NO !! DOE spends more on solar & wind than on advanced nuclear. We have more oil & gas than Saudi Arabia - more than 100 years worth - and we find more every year. Do you want 2 mil high-paying jobs? Ships exporting petrol products rather than importing them? Super-clean power generation, CNG for public transport, school busses, and passenger busses? LNG & petrol ships for exporting OUR products? You need only to look right here in the USA and Canada. I KNOW THE PETRO-CHEMICAL, PIPELINE, AND SHIPBUILD INDUSTRIES WELL.
(I would love to have my 1955 Triumph TR-2 or my 1964 Corvair. But,alas, we are no longer able to buy cars like those,)
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is