If you revamp and update this device, you could submit it to the Design Gadget Freak column. We pay $500 for complete Gadget Freak entries. If you're interested, send me a note at email@example.com and I'll send along the details.
Nowadays, I would update the power supply with a voltage regulator IC and update the op amp, but I think you'll like the simplicity. Hint: two precision thermistors, a 25-turn pot and a voltage comparator op amp.
I grew up on Popular Electronics. Every project was very well documented with schematics and wiring diagrams and parts lists. I seem to see too many of these GF articles not even up to the standards of PE in the good old days - 50's and 60's.
This column needs to be presented with better editing. I agree that many of these GF cases are incomplete and have indecipherable or incorrect schematics and incomplete parts lists like this one and dead end links. Even Design News has had too many errors lately.
I know the audience is full of engineers but who needs to have work so hard to read the article? When these projects are presented with a half baked presentation it is disrespectful to the author and to the readers. And a pain in the @ss to read. It takes the fun out of it.
So PLEASE put a little time into editing and put everything, photos, schematics, BOM's etc into the article on the same page or have links that work.
I found that a far simpler means of solar water heating was to submerge a black plastic sheet in the pool when it was not in use. The sheet did ned to be well below the surface, so as to heat a larger volume of water, it could even be on the bottom, out of the way. It was not hard to remove for serious pool use, and it consumed no energy, and it was very cheap.
Most gadget freak write-ups, it appears to me, are incomplete in one way or another. The result is that the missing order number for the dual temperature controller is to be expected. Just attempt to find a circuit, or some other critical build information. Usually some vital information is missing. That is what to expect.
Engineers at Fuel Cell Energy have found a way to take advantage of a side reaction, unique to their carbonate fuel cell that has nothing to do with energy production, as a potential, cost-effective solution to capturing carbon from fossil fuel power plants.
To get to a trillion sensors in the IoT that we all look forward to, there are many challenges to commercialization that still remain, including interoperability, the lack of standards, and the issue of security, to name a few.
This is part one of an article discussing the University of Washington’s nationally ranked FSAE electric car (eCar) and combustible car (cCar). Stay tuned for part two, tomorrow, which will discuss the four unique PCBs used in both the eCar and cCars.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.