Your robot is a nice impact testor, but it is lacking in a few of the basics seen with the human slapshot! There is no rotation through the impact zone - something that all players do to varying degrees. Proof is seen with photos of slapshots that show the finish position of the toe of the blade. A properly executed slapshot shows the toe pointing toward the target. Your robot generates an open blade position, toe pointing 90 degrees away from the target - a no-no! We found this out when constructing a robot back in the 90's! Also, the "lower hand" is way too far up the shaft - also not typical of shooters!
First impression when digging into the article on optimizing composites for Hockey Sticks, was, “Gosh! the DOE fixture is going to be more of a design challenge than the actual composite design!” … and well; in fact, that’s where the article went.Accordingly, following that “Necessity is the Mother of Invention”, the world now has a wonderful, proven method of repetitively testing new composite materials for hockey stick design. This is what I call a game-changer.(Beautiful Robot, BTW) Subsequently, I see the NHL experiencing a gradual increase in scoring statistics in the coming years, not unlike the steroid era of MLB in the ‘90s. But this time, in a good way.
@Tool_Maker: I would have to agree that there is probably far too much liability to turn this into the "pitching machine" equivalent for hockey for the mainstream public. These machines deliver repeated slap shots of up to 110 mph. Professional hockey players might be primed to return these, but not the average Joe or even the avid hockey enthusiast.
@jmiller: You were right on to spot a correlation with this type of testing and what's used in golf clubs. The guys got their start doing testing on the golf equipment and that was the genesis for the idea for the hockey robot. As far as the cost of sticks go, they actually do sell for upwards of $300 so there is motivation to support testing that ensures the composite sticks don't break all that easily.
I would think the product liability costs would eat up any profit that could be made selling these to the public. Can you imagine the lawsuit if some over zealous coach overmatched his goalie by dialing this thing up to the next speed?
This is similar to a pitching machine, but the object here is to get in front of the puck. I think it would be easy to seriously injure a young hockey player by misjudging his/her ability and the speed of the puck.
I was wondering if these guys had any experience with golf club machines. That's a great example where this type of technology is used all the time to help develop better clubs and balls. I'm just a little surprised that there is not more of a market for these devices in the hockey market. I suppose the average hockey stick doesn't cost as much as the $300 dollar driver.
I'm sure if there's any kind of market for these, more will be built. And given the team's experience deploying similar robot technology for testing golf clubs, I'm sure they are on the prowl for more sports-related applications.
I hope the next step is building more of these. Not for testing, though. For playing! Robocup has little 'bots playing on a small field. Two teams of these would put that to shame. Heck, they're big enough to slap the soccer 'bots into the net.
This robot setup is great for teting sticks, but it also has high potential for working out goalies. Rapid fire excercises help a goalies reflexes and their ability to stay on their toes.
They actually aren't planning on selling the robots to stick manufacturers because they don't feel like that's the right business model. The robots are expensive and the manufacturers won't really use them enough to justify a capital expenditure, is what they told me. They are, however, offering the stick testing as a service to stick manufacturers and have several contracts already in play. I believe they are also working with partners on using the robot testing to explore innovative technologies like new materials and such to enhance stick performance.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
